Bedienungsanleitung Panasonic TH42PH11ES (Seite 22 von 48) (Englisch)

602612

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Normal

Normalise

Auto Setup

Pos. /Size

V-Pos

H-Pos

V-Size

Dot Clock

H-Size

Clock Phase

Normal

Normalise

Pos. /Size

V-Pos

H-Pos

V-Size

H-Size

Auto Setup

Adjusting Pos. /Size

Press to display the Pos. /Size menu.

Press to select the menu to adjust.

Press to adjust the menu.

Press to exit from adjust mode.

Notes:

• Unadjustable items are grayed out.

Adjustable items differ depending on the input signal and the display mode.

• Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are

memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,

1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture

position movement cannot be controlled by the Picture Pos./Size function.

• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the adjustment is not memorized. When

exiting the mode, the screen will return to a former adjustment.

During “Video (S Video)”, “Digital”,

“SDI” and “HDMI” input signal.

During “Component”, “RGB” and

“PC” input signal.

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION

( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Helpful Hint ( /

Normalise

Normalisation)

Auto Setup

Automatically adjust H-Pos / V-Pos / Clock Phase / Dot Clock and set H-Size / V-Size the standard

value when RGB signal is input.

Notes:

• If the dot clock frequency is 108 MHz or higher, Dot Clock cannot be made.

• If the image is that the edge is hardly ﬁ gured out or shadowy, that cannot be adjusted automatically.

In such case, press Auto Setup again after changing the image to the clearer one.

• When DVI-D is input, Clock Phase cannot be adjusted automatically.

•

Select Normalise in Pos. /Size and press the ACTION ( ) button when appropriate adjustment cannot be made.

H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position.

H-Size Adjust the horizontal size. V-Size Adjust the vertical size.

Dot Clock (During “Component”, “RGB” and “PC” input signal)

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,

adjust so that any such noise is minimized.

Clock

Phase

(During “Component”, “RGB” and “PC” input signal)

Eliminate the ﬂ ickering and distortion.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH42PH11ES Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH42PH11ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info