Bedienungsanleitung Panasonic TH42PH30ER (Seite 43 von 50) (Englisch)

602616

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Options Adjustments

Item Adjustments

Studio W/B

Off: Nullify all the settings adjusted.

On: Sets the colour temperature for TV studio.

Note: Valid only when the “Warm” is set as “White balance” in Picture menu.

Studio Gain

Sharpens the contrast for a better view when a part of the image is too light to see.

Off: Disables “Studio Gain”.

On: Enables “Studio Gain”.

Note: This setting is valid only when the input signals are as follows:

Component Video, RGB (analog), HDMI

Power On Screen

Delay

Off

1 2 3.... 30

You can set the power-on delay time of the displays to reduce the power load, when you press

turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.

Set each display’s setting individually.

Off: The display will be turned on at the same time as

is pressed.

1 to 30 (sec.)

: Set the power-on delay time (second).

After pressing , the display will be powered on with time delay depending on this setting.

Notes:

• During this function is working, the power indicator is blinking green.

• This function also works when the power recovers from failure or after plugging off and in again the

power cord.

All Aspect

Sets All Aspect mode (advanced aspect setting) or default aspect mode.

With each press of

button, the aspect changes in the selected mode.

Off: Default aspect mode

On: All Aspect mode

Aspect mode of each setting is as follows:

(Example: HD signal)

Off 4:3→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just

On 4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2

Auto Setup

Sets the operational mode of the automatic position adjustment in the Pos./Size menu.

Manual: Automatic position adjustment starts when

is pressed on the remote control or automatic

position adjustment is executed from the Pos./Size menu.

Auto: Other than remote control or menu operation, automatic position adjustment starts:

When the display power is turned ON.

When the input signal is switched.

Rotate

Off: Does not rotate the image.

On: Rotates the image 180 degrees.

Power On Message

(No activity power

off)

Whether to show/hide No activity power off Precautions at the time of power ON is set.

On: The warning precautions are shown at the time of power ON.

Off: The warning precautions are not shown at the time of power ON.

Note: This setting is enabled only if “No activity power off” is “Enable”.

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or

“Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the button on main unit together with button on the remote control and hold for more than 5 seconds.

The “Shipping” menu is displayed and the lock is released when it disappears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH42PH30ER Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH42PH30ER

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info