Bedienungsanleitung Panasonic tx 28 pl 1 (Seite 13 von 40) (Englisch)

149172

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The widescreen TV will allow you to enjoy viewing the picture at its maximum size, including

widescreen ‘cinema format’ pictures.

Note: Just mode is not available when viewing an RGB source.

Press the ASPECT button to move through the

six as p e ct op t i ons: Pana s oni c Auto, 4 :3 , Z oom,

16:9 (Full), 14:9 and Just

Panasonic Auto

Panasonic Auto determines the best aspect ratio to

use to display the picture you are viewing. It does this

using a four step process to determine if the picture

being viewed is a widescreen picture.

If Panasonic Auto detects a widescreen signal it

switches into the appropriate 16:9 or 14:9 widescreen

mode. If Panasonic Auto d o es not detect a

widescreen signal then the picture is displayed in Just

or 4:3 mode.

The text shown on the screen indicates how

Panasonic Auto determined which ratio to use:

’WIDE’ appears in the top left of the screen if a

widescreeen identification signal (WSS) is found or a

signal found through a Scart socket. Panasonic Auto

switches to the appropriate 16:9 or 14:9 widescreen

ratio

’Panasonic Auto’ appears i n the top left of the screen if

black stripes above and below the picture are

detected. Panasonic Auto chooses the best ratio and

expands the picture to fil l the screen. This process can

take several minutes, depending how dark the picture

is.

’Panasonic Auto’ appears in the top left of the sc r een

and red and green keys at the bottom if no indication of

a widescreen signal is found, the picture is displayed

in Just or 4:3 mode. If the picture has a standard 4:3

aspect ratio then you may prefer to view it at its original

size, the red and green keys that appear allow you to

choose between viewing at standard 4:3 size or

expanded in Just mode.

Equally, you may prefer to selec t one of the other

modes available to view the picture.

Notes:

D If, i n Panasonic Auto mode, you experience

problems with the screen display size when

playing back widescreen format recordings from

your VCR then it is possible that the tracking

control of your VCR requires adjustment (your

VCR instruction book will contain adjustment

details).

D The widescreen aspect ratios of different films and

programmes can vary. If these are wider than a

standard 16:9 aspect picture then a black band

may be visible at the top and bottom of the screen.

ASPECT CONTROLS

SPECT

’Panasonic Auto’ ap pears in the top left of the screen,

The picture is displayed in Just or 4:3 mode,

red and green keys appear, allowing switching between

Just and 4:3 modes.

Panasonic Auto

4:3 Just

’Panasonic Auto’ ap pears in the top left of the screen,

The best ratio is chosen and the picture expanded to fill the screen.

’WIDE’ appears in the top left of the screen, Panasonic Auto

switches to the appropriate 16:9 or 14:9 widescreen ratio.

WIDE

Panasonic Auto

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic tx 28 pl 1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info