Bedienungsanleitung Panasonic TX-32C200E (Seite 13 von 123) (Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

629000

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

English - 13 -

TV Menu Contents

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode

can be set to one of these options: Cinema, Game, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save Mode

For setting the Power Save Mode to Eco, Picture Off or Disabled.

(When the Mode is Dynamic, Power Save Mode is automatically set as Disabled.)

Backlight (Optional)

This setting controls the backlight level. The backlight function will be inactive if the

Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media

Player Mode or while the picture mode is set to Game.

Noise Reduction

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction

setting to reduce the amount of noise.

Advanced Settings

Dynamic Contrast

You can change the dynamic contrast ratio to desired value.

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the desired picture size from Picture Zoom menu.

Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage

switching.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

RGB Gain

You can congure the colour temperature values using the RGB Gain feature.

HDMI True Black

While watching from a HDMI source, this feature will be visible in the Picture Settings menu.

You can use this feature to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game Mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture

Settings while in PC mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-32C200E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info