Bedienungsanleitung Panasonic TX-50A300E (Seite 9 von 72) (Englisch)

563081

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

English - 8 -

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on

the remote control.

Press the side function switch until the TV comes on

from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press

the side function switch until the TV switches into

standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigationbuttonsandwhennished,pressOK to

continue.

Note: Depending on the Country selection you may

be asked to set and conrm a PIN at this point. The

selected PIN cannot be 0000. You have to enter it if you

are asked to enter a PIN for any menu operation later.

You can activate Store Mode option at this point.

This option is intended only for store use. It is

recommended to select Home Mode for home use.

If Store Modeisselected,aconrmationscreenwill

be displayed. Select YES to proceed. This option

will be available in Other Settings menu and can be

turned off/on later.

If Home Mode is selected, Store Mode will not be

available after the First Time Installation. Press OK

button to continue.

Aerial Installation

If you select Aerial option from the search type selection

screen, the television will search for digital terrestrial TV

broadcasts. After all the available stations are stored,

the Channel List will be displayed on the screen.

While the search continues a message will appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK toconrm.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Press MENU button to quit channel list and watch TV.

Cable Installation

If you select Cable option and press OK button on

the remote control a confirmation screen will be

displayed. Select YES and press OK to proceed.

To cancel operation, select NO and press OK. You

can select frequency ranges from next screen. Enter

the frequency range manually by using the numeric

buttons.When nished, press OK button to start

automatic search.

Note: Searching duration will change depending on

the selected search step.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives or USB memory

stick to your TV by using the USB inputs of the TV.

IMPORTANT!Backup your les before making

any connections to the TV. The Manufacturer will

notberesponsibleforanyledamageordataloss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting.

While formatting a USB hard disk that has 1TB (Tera

Byte)or morele capacity, youcan experience

problems with the formatting process.

Quickly plugging and unplugging USB devices, is a

very hazardous operation. This may cause physical

damage to the USB player and the USB device itself.

DonotpullouttheUSBmodulewhileplayingale.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the media browser menu

can only display 1000 image les stored on the connected.

Media Player Menu

Youcan playphoto, music,and movieles stored

on a USB disk by connecting it to your TV. Connect

a USB disk to one of the USB inputs located on the

side of the TV. Pressing the MENU button while in the

Media Browser mode will access the Picture, Sound

and Setup menu options. Pressing the MENU button

again will exit from this screen. You can set your Media

Player preferences by using the Setup menu.

Getting Started

First Time Installation - USB Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-50A300E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-50A300E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info