Bedienungsanleitung Panasonic TX-L37S20E (Seite 27 von 68) (Englisch)

598105

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

How to Use Menu Functions 

Basic

Item Adjustments / Configurations (alternatives)

Sound

Mode

Selects the basic sound mode (Music / Speech / User)

The selected mode affects all input signals.



Music: Improves sound quality for watching music video, etc.

Speech: Improves sound quality for watching news, drama, etc.

In Music and Speech mode, you can adjust “Bass” and “Treble” settings, and those



settings will be stored for each mode.

User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.

For the User mode, “Equalizer” will appear on the Sound Menu instead of “Bass” and 

“Treble”. Select the “Equalizer” and adjust the frequency. “Equalizer” (below)

Bass

Increases or decreases level to enhance or minimise lower, deeper sound output

Treble

Increases or decreases level to enhance or minimise sharper, higher sound output

Equalizer

Adjusts the frequency level to suit your favourite sound quality

This function is available when “Mode” is set to “User”.



Select the frequency and change the frequency level by using the cursor button.

If you want to enhance the bass sound, raise the level of the lower frequency. If you 

want to enhance the treble sound, raise the level of the higher frequency.

To reset the levels of each frequency to the default settings, select the “Reset to



Defaults” by using cursor button, and then press the OK button.

Balance

Adjusts volume level of right and left speakers

Headphone Volume

Adjusts the volume of the headphones

Surround

Surround sound settings (Off / V-Audio / V-Audio Surround)

V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects

V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate

improved spatial effects

Volume Correction

Adjusts the volume of individual channel or input mode

Speaker Distance to

Wall

Adjusts the low frequency sound (Over 30cm / Up to 30cm)

If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.



If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.



MPX

Selects multiplex sound mode (if available)

Normally: Stereo



Stereo signal cannot be received: Mono

M1 / M2: Available while mono signal is transmitted

Analogue mode only

Audio Preference

Selects the initial setting for audio tracks (Auto / MPEG)

Auto : Automatically selects the audio tracks if programme has more than two tracks.

The priority is given in the following order - Dolby Digital Plus, HE-AAC,

Dolby Digital, MPEG.

MPEG : The priority is given to MPEG as long as the programme contains MPEG audio.

Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed by



Dolby Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel audio.

HE-AAC is a perceptual coding method used to compress digital audio for efficient 

storage and transmission.

MPEG is an audio compression method that compresses audio to the smaller size



without any considerable loss of audio quality.

Dolby Digital Plus and HE-AAC are the technologies for HD (High definition) programmes.



DVB mode only

SPDIF Selection

SPDIF : A standard audio transfer file format

Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal

(Auto / PCM)

Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.

HE-AAC (48 kHz) is output as DTS.

MPEG is output as PCM.

PCM : Digital output signal is fixed to PCM.

For DVB mode or Video mode (p. 48)



MPEG Optical Level

Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial

setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)

Normally, MPEG sound is larger comparing with the other types of audio track.



DVB mode only

HDMI1 / 2 / 3 Input

Select to fit the input signal (Digital / Analogue) (p. 63)

Digital : HDMI cable connection

Analogue : HDMI-DVI adapter cable connection

HDMI input mode only



SPDIF Delay

Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the

sound does not synchronize the image

DVB mode only



Reset to Defaults

Press the OK button to reset the present Sound Mode, Balance, Headphone Volume

and Surround to the default settings

A different menu will be displayed while PC or SD Card is used. (p. 45, 47 and p. 49)

Only available items can be selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-L37S20E Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-L37S20E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info