Bedienungsanleitung Panasonic TX-L39EM5 (Seite 77 von 84) (Englisch)

502177

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

FAQs

Problem Actions

Screen

Chaotic image, noisy

Set [P-NR] in the Picture Menu (to remove noise). (p. 30)

Check nearby electrical products (car, motorcycle, fluorescent lamp).

No image can be

displayed

Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum? (p. 30)

Please also refer to “Neither image nor sound is produced” (p. 76)

Blurry or distorted

image

(no sound or low

volume)

Reset channels. (p. 38)

Please also refer to “Neither image nor sound is produced” (p. 76)

Unusual image is

displayed

Turn the TV Off with Mains power On / Off switch, then turn it On again.

If the problem persists, initialise all settings. [Shipping Condition] (p. 48)

Sound

No sound is produced

Is Sound Mute active? (p. 9)

Is the volume set to the minimum?

Is Speaker Selection (VIERA Link) set to [TV]?

Please also refer to “Neither image nor sound is produced” (p. 76)

Sound level is low or

sound is distorted

Sound signal reception may be deteriorated.

Set [NICAM] (p. 31) in the Sound Menu to [Off]. (Analogue only)

Please also refer to “Neither image nor sound is produced” (p. 76)

Digital Channel

No programmes

shown on TV Guide

Reset channels. (p. 38)

Check the digital transmission by contacting Digital UK on 08456 50 50 50 or at www.

digitaluk.co.uk

Check the analogue broadcast (if still available in your area).

Consult an aerial engineer to check the alignment of your aerial.

Cannot find a channel

you have previously

watched

The channel may broadcast for part of the day.

Check the channel in the TV Guide. (p. 20)

Channel position numbers may be changed by broadcasters.

Reset channels. (p. 38)

HDMI

Sound is unusual

Set the sound setting of the connected equipment to “2ch L.PCM”.

Check the [HDMI1 / 2 Input] setting in the Sound Menu. (p. 32)

If digital sound connection has a problem, select analogue sound connection. (p. 73)

Pictures from external

equipment are unusual

when the equipment is

connected via HDMI

Check the HDMI cable is connected properly. (p. 68)

Turn the TV and equipment Off, then turn them On again.

Check an input signal from the equipment. (p. 74)

Check the output resolution of the equipment.

Use equipment compliant with EIA/CEA-861/861D.

Network

Cannot connect to the

network

Check the LAN cable is connected properly. (p. 46)

Check the connections and settings. (p. 46, 47)

Check the network equipment and network environment.

The router may not be set to issue IP address automatically.

If the network administrator prefers to allocate an IP address,

set an IP address manually.

(p. 46)

The router may be using MAC address filtering (security setting).

Confirm the MAC Address of this TV (p. 47) and set the router to be able to use it.

If the problem persists, consult your Internet Service Provider or telecommunications

company.

Other

The TV does not

switch On

Press and hold the standby On / Off switch on the remote control for about 1 second if

Power LED is red.

Check the mains lead is plugged into the TV and the socket outlet.

The fuse in the mains plug may have blown. Replace it with one of an identical rating

(p. 4)

The TV goes into

Standby mode

Auto power standby function is activated. (p. 10)

The TV enters Standby mode about 30 minutes after analogue broadcast ends.

The remote control

does not work or is

intermittent

Are the batteries installed correctly? (p. 8)

Has the TV been switched On?

The batteries may be running low. Replace them.

Point the remote control directly at the front of the TV (within about 7 m and a 30 degree

angle of the front of the TV).

Situate the TV so that sunshine or other sources of bright light do not shine on the TV’s

remote control signal receiver.

Parts of the TV

become hot

Even when the temperature of parts of the front, top and rear panels has risen, these

temperature rises do not cause any problems in terms of performance or quality.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-L39EM5 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-L39EM5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info