Bedienungsanleitung Panasonic TX-L42U3b (Seite 101 von 108) (Englisch)

523151

101

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Frequently Asked Questions ●

FAQs, etc.

101

Problem Actions

HDMI

Sound is unusual

Set the sound setting of the connected equipment to ●

“2ch L.PCM”.

Check the “HDMI1 / 2 / 3 / 4 Input” setting in the Sound Menu. (p. 33

● )

If digital sound connection has a problem, select analogue sound

●

connection. (p. 97)

Pictures from external

equipment are unusual

when the equipment is

connected via HDMI

Check the HDMI cable is connected properly. (p. 92)●

Turn the TV and equipment Off, then turn them On again.●

Check an input signal from the equipment. (p. 97)●

Check the output resolution of the equipment.●

Use equipment compliant with EIA/CEA-861/861B.●

Network

Cannot connect to the network

Check the LAN cable or Wireless LAN Adaptor is connected ●

properly. (p. 75)

Check the connections and settings. (p. 75 - 79)

●

Check the network equipment and network environment.●

The router may not be set to issue IP address automatically. If the ●

network administrator prefers to allocate an IP address, set an IP

address manually. (p. 77)

The router may be using MAC address filtering (security setting).

●

Confirm the MAC Address of this TV (p. 76) and set the router to be

able to use it.

If the problem persists, consult your Internet Service Provider or

●

telecommunications company.

Cannot select the file during

DLNA operations

Is media server of the connected equipment prepared? (p. 74)●

Check applicable data format. (p. 74)●

Cannot operate VIERA CAST

Check the connections and settings. (p. 75 - 79)●

The server or connected line might be busy now.●

Other

The TV does not switch On

Press and hold the standby On / Off switch on the remote control ●

for about 1 second if Power LED is red.

Check the mains lead is plugged into the socket.●

The fuse in the mains plug may have blown. Replace it with one of ●

an identical rating (p. 4).

The TV goes into Standby mode

Auto power standby function is activated. (p. 9)●

The TV enters Standby mode about 30 mins. after analogue ●

broadcast ends.

The remote control does not work

or is intermittent

Are the batteries installed correctly? (p. 8)●

Has the TV been switched On?●

The batteries may be running low. Replace them.●

Point the remote control directly at the front of the TV (within about ●

7 m and a 30 degree angle of the front of the TV).

Situate the TV so that sunshine or other sources of bright light do

●

not shine on the TV’s remote control signal receiver.

Parts of the TV become hot

Temperature rises of parts of the front, top and rear panels will not ●

pose any problems in terms of performance or quality of the TV.

Overcurrent error message

appears

The connected USB device might cause this error. Remove the ●

device and turn the TV Off with Mains power On / Off switch, then

turn it On again.

Check if foreign objects are inside the USB port.

●

An error message appears

Follow the message’s instructions.●

If the problem persists, contact your local Panasonic dealer or the ●

authorized Service Centre.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-L42U3b Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-L42U3b

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info