Bedienungsanleitung Panasonic TX-L55ET5 (Seite 13 von 40) (Englisch, Holländisch)

502171

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

4. After the access point setting is finished, perform the connection test

Check wireless network connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection.

Connection Test

5. Go to the next step

(Press twice)

: succeeded

The test is successful and the TV is connected to the

network.

: failed

Check the settings and connections. And then select

[Retry].

●

To set manually, select [Manual] and set each item.

[WPS(Push button)]

1. Press the WPS button on the access point until the light flashes

2. Connect the TV with the access point

1) Please press the ‘WPS’ button on the wireless

access point until its light flashes.

2) When the light is flashing select ‘Connect’ on

TV.

If you are unsure, please check the instruction

manual of the wireless access point.

WPS(Push button)

Connect

●

Ensure that your access point supports WPS for this setup.

●

WPS: Wi-Fi Protected Setup™

●

If the connection has failed, check the settings and positions of your

access point. And then, follow the on-screen instructions.

3. After the access point setting is finished, perform the connection test

Check wireless network connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection.

Connection Test

4. Go to the next step

(Press twice)

: succeeded

The test is successful and the TV is connected to the

network.

: failed

Check the settings and connections. And then select

[Retry].

●

To set manually, select [Manual] and set each item.

Select [Home]

Select [Home] viewing environment to use in your home environment.

Please select your viewing environment.

Home Shop

select

set

■ [Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main features of this TV.

Select [Home] viewing environment to use in your home environment.

●

You can return to viewing environment selection screen at the stage of Shop confirmation screen.

1 Return to viewing environment

selection screen

2 Select [Home]

Please select your viewing environment.

Home Shop

select

set

Shop

You have selected shop mode

To change viewing environment later on, you will need to initialise all settings by accessing Shipping

Condition.

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.

Note

●

To retune all channels [Auto Setup] in the Setup Menu

●

To add the available TV mode later [Add TV Signal] in the Setup Menu

●

To initialise all settings [Shipping Condition] in the Setup Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-L55ET5 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-L55ET5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info