Bedienungsanleitung Panasonic TX-P50ST30E (Seite 14 von 104) (Englisch)

461786

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Auto Setup

Setup the network connection

Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 75).

•

To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is required.

Please note that this TV does not support wireless public access points.

•

Ensure the network connections (p. 12) and network environment are completed before starting setup.

Select the network type

Network Setup

Select Wired or Wireless

Wired Wireless Set later

[Wired] “Wired connection” (p. 12)

[Wireless] “Wireless connection” (p. 12)

access

select

•

To setup later on or skip this step

Select [Set later] or

EXIT

■ [Wired]

1. Select [Auto]

Check network cable connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection for VIERA Connect.

Connection Test

: succeeded

The test is

successful and the

TV is connected to

the network.

: failed

Check the settings

and connections. And

then select [Retry].

Acquire IP Address

Auto Manual

access

select

Automatically setup is done and the test of the

network connection starts.

•

To set manually, select [Manual] and set

each item. For details (p. 71)

2. Go to the next step

(Press twice)

■ [Wireless]

Select the connection type

Connection Type

Please select network connection type.

Search for access point

WPS(Push button)

access

select

[Search for access point]

Access points found automatically are listed.

1. Select your desired access point

Access Point A

SSID

Access Point B

Access Point C

11n(2.4GHz)

11n(5GHz)

Available Access Points

No. Wireless type Encrypt Reception

access

select

: Encrypted access point

•

To search access points again

(yellow)

•

For the information of the

highlighted access point

•

To set manually (p. 74)

(red)

2. Access the encryption key input mode

Encryption Key Setting

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

Please input the encryption key.

Encryption key

•

If the selected access point is not encrypted, the

confirmation screen will be displayed. It is recommended

to select the encrypted access point.

3. Enter the encryption key of the access point

.!:#

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #

a b c d e f g h i j k l m n o p q r s t

u v w x y z ( ) + - . * _

Access Point Settings

Encryption key

Set characters Store

BACK/

RETURN

select

set

•

You can set characters by

using numeric buttons.

“Characters table for

numeric buttons” (p. 91)

Quick Start Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P50ST30E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P50ST30E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info