Bedienungsanleitung Panasonic TX-P50ST30E (Seite 51 von 104) (Englisch)

461786

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Timer Programming

Timer Programming from Menu

The Timer Programming menu allows you to choose programmes that you wish to remind watching or

record to the external recorder. At the correct time, the TV will tune to the correct channel automatically

to record even if the TV is in Standby mode.

TV Guide may also be used to set timer programming event (p. 23).

•

Timer Programming can store up to 15 events.

•

For recording using Timer Programming, the TV must be either On or in standby. For reminders to be

displayed, the TV must be On.

•

No other channel can be selected while the recording of Timer Programming is in progress.

•

It may not be possible to record an encrypted programme (which is copy-protected).

•

When recording programmes to the external recorder, be sure to make the proper settings on the

recorder connected to the TV.

If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 78) and the [Link

Settings] (p. 39) are correct, no setting of the recorder is required. Also read the manual of the recorder.

•

If the recorder is not compatible with Q-Link or similar technologies, set the timer of the recorder in addition

to the Timer Programming on the TV. For preparations of a recorder, read the manual of the recorder.

•

Recordings to the external recorders are always in standard definition composite video via SCART,

even if the original programme is in high definition.

■

To return to TV

EXIT

■

To unlock the tuner

and stop recording

EXIT

Select the tuner you want to use (DVB or Analogue)

(p. 18)

Display the menu

Select [Timer]

Main Menu

Picture

Sound

Timer

Setup

access

select

Select [Timer Programming]

AccessTimer Programming

Off Timer

Auto Standby

Off

access

select

Note

•

Check that the LED is orange. If not, timer programmes are not active or not stored.

•

Timer Programming reminder messages will remain displayed until one of the following occurs:

• You press the OK button to view the programme or the EXIT button to cancel the reminder.

• The timer programming event that the reminder is set for ends.

•

“!” identifies that any timer programming events have overlapped. [Ext Rec.] is given priority over

[Reminder]. As for the overlapped two or more [Ext Rec.], the first timer programming event starts and

finishes as programmed. The next timer programming event can then start.

•

2 minutes before the starting time, a reminder message appears if you are watching TV.

• To remove the message and

start the programme

• To cancel the Timer

Programming

EXIT

•

The recording of Timer Programming will automatically change to the programmed channel 10

seconds before the start time.

•

To stop recording of the timer programming event, it may be necessary to stop the recorder manually.

•

The recording of Timer Programming will be performed even if the TV is in Pause Live TV recording

(p. 81). In this case, these recordings will be cancelled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P50ST30E Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P50ST30E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info