Bedienungsanleitung Panasonic TX-P50ST50 (Seite 87 von 112) (Englisch)

502188

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Link Functions (Q-Link / VIERA Link)

VIERA Link “ ”

∗

Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.

This TV supports “HDAVI Control 5” function.

Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and

SCART cables allow you to interface them automatically (p. 84, 85).

These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.

●

Some functions are not available depending on the equipment’s version of HDAVI Control. Confirm the connected

equipment’s version of HDAVI Control.

●

VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known

as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.

As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

●

Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

●

For information about applicable Panasonic equipment, consult your local Panasonic dealer or refer to

www.panasonic.co.uk

Preparations

●

Connect the equipment supporting VIERA Link.

●

VIERA Link connection (p. 84, 85)

●

Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.

Recommended Panasonic’s HDMI cable part number:

•

RP-CDHS15 (1.5 m)

•

RP-CDHS30 (3.0 m)

•

RP-CDHS50 (5.0 m)

●

Use fully wired SCART cable.

●

Set up the connected equipment. Read the manual of the equipment.

●

For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the

recorder.

●

Download Analogue channel setting “Analogue channel download” (see below)

●

Set [VIERA Link] to [On] in the Setup Menu. [VIERA Link] (p. 43)

●

Set up the TV.

After connection, turn the equipment on and then switch the TV on.

Select the input mode from HDMI1, HDMI2 or HDMI3 (p. 31), and make sure that an image is displayed

correctly.

This setup should be done each time when the following conditions occur:

•

for the first time

•

when adding or reconnecting equipment

•

when changing setup

Features available

Analogue channel download

Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is still

broadcast). Digital channel settings are not downloaded.

●

To download the Analogue channel settings

[Q-Link Download] (p. 43), [Auto Setup] (p. 16, 50)

Easy playback

Automatic input switching - When the connected equipment is operated (during playback or menu operations, etc.), the

input mode is switched automatically. When playback is stopped or menus are exited, the input mode returns to the

original setting.

Power on link

When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the

TV is turned on and input mode is switched automatically so that you can view the content. (Only when the TV is in

Standby mode.)

Power off link

When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.

●

This function will work even if the TV enters Standby mode automatically by auto power standby function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P50ST50 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P50ST50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info