Bedienungsanleitung Panasonic TX-P50V20B (Seite 104 von 112) (Englisch)

672186

104

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

104

Message Meaning / Action

All contents will be lost.

Are you sure to delete this device?

Once you unregister the USB HDD, all the recorded programme will be ●

erased.

All tuning data will be erased “Shipping Condition” will erase all tuning data (p. 51).●

Are you sure ? Confirm correct operation.●

Are you sure you want to delete this

timer ?

Press OK to delete timer.

Press RETURN to return.

Confirm correct operation.●

Bad signal

The signal is weak. Check the aerial is plugged in properly. It may ●

be necessary to have an aerial installer check the signal and aerial

alignment.

Reset channels. (p. 40 and p. 41)

●

Cannot register another device because

the list is full.

Up to 8 USB HDDs can be registered with this TV.●

Child Lock is active!

Press OK to enter PIN.

The selected channel is locked in Child Lock (p. 54). You must enter the ●

PIN number before the channel will be displayed.

Faulty dish

The satellite cable might be short-circuited or there might be connection ●

problems of the cable. Check the cable and connection and then turn the

TV Off with the Mains power On / Off switch, and turn it On again.

If the message still persists, it may be necessary to have a dish installer

●

check the dish and cable.

Feature not available.

It is not possible to record from COMPONENT or HDMI. Connect the ●

recorder to the TV using a fully wired SCART cable for recording from the

TV tuner.

Confirm Q-Link or VIERA Link settings (p. 86 - 89).

●

Feature not available.

Press OK to view how it works.

The selected feature on VIERA TOOLS is not available. Press the OK ●

button to view the demonstration to explain how to use it.

Found new software version

∗∗∗

Press OK to start update (may take

40 mins) or Press EXIT to ignore

and you can update when TV is in standby

There is a new software available.●

Invalid operation - Please check settings

and connections.

Check the Q-Link or VIERA Link connection and setting (p. 86 - 89).●

Invalid system time. Please exit !

Cannot get the time information and cannot edit Timer Programming ●

screen. Check the connection of the RF cable.

Invalid system time, Timer Programming

will not work.

Please press TV button on remote control

and check time display on Banner

Cannot get the time information. If there is no time displayed on the ●

Information banner, check the connection of the RF cable.

Max. number of timers already set ! The maximum number of timer programming events is 15.●

New channels found!

Press OK to update channel list.

Press EXIT to ignore.

There may be new channels available.●

This message will appear each time a change is made by the ●

broadcasters. This message can be deactivated by setting “New Channel

Message” to Off in “DVB Tuning Menu”.

Selecting OK will perform “Update Channel List”.

On screen messages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P50V20B Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info