Bedienungsanleitung Panasonic TX-P50VT50 (Seite 64 von 128) (Englisch)

502193

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Timer Programming

Timer Programming from Menu

The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external

recorder, the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in

Standby mode.

TV Guide may also be used to set timer programming event (p. 28).

●

Timer Programming can store up to 15 events.

●

Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or

service provider.

●

For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, the

TV must be on.

●

No other channel can be selected while the recording of Timer Programming is in progress.

●

Recording an encrypted (copy-protected) programme may not be possible.

●

When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected

to the TV. If a recorder compatible with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 99, 100)

and [Link Settings] (p. 49) are completed, no setting of the recorder is required. Also read the manual of the recorder.

●

If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the

recorder. For preparations of a recorder, read the manual of the recorder.

●

For more information of the USB HDD / SD Card Recording (p. 74, 110)

●

Recording to the external equipment via SCART is always in standard definition (composite video), even if the

original programme is in high definition.

Select the tuner you want to use

(p. 22)

Display the menu and select [Timer]

Timer

select

access

Select [Timer Programming]

Access Timer Programming

Off Timer

Auto Standby

Off

select

access

Set timer programming event details

1 Start making the settings

2 Select the function ([Ext Rec.], [USB HDD Rec.], [SD Card Rec.] or [Reminder])

[Ext Rec.] / [USB HDD Rec.] / [SD Card Rec.] : Records the programme to the external recorder, the USB HDD

or the SD Card.

When the start time comes, the channel will be switched automatically and the video and audio signals will be

output. 2 minutes before the starting time, a reminder message appears if you are watching TV.

For [USB HDD Rec.] and [SD Card Rec.], you can select a recording mode:

[DR]: Direct recording (normal mode)

[LT1]: Long time recording

[LT2]: Extra long time recording

“Recording time for the USB HDD / SD Card Recording” (p. 111)

[Reminder]

: Reminds you to watch the programme.

When you are watching TV, a reminder message appears 2 minutes before the start time.

Press the OK button to switch to the programmed channel.

3 Set the channel, date and time (repeat the operations as below)

Set items in the order of 1 to 4.

select the item

set

●

1, 3 and 4 can also be entered

with numeric buttons.

Store

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P50VT50 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P50VT50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info