Bedienungsanleitung Panasonic TX-P55ST50J (Seite 106 von 112) (Englisch)

584516

106

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

FAQs

106

Problem Causes / Actions

Screen

Chaotic image, noisy ●

Set [P-NR] in the Picture Menu to remove noise. (p. 38)

●

Check nearby electrical products (car, motorcycle, fluorescent lamp).

No image can be

displayed

●

Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?

(p. 38)

●

Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to

match the output of the external equipment. (p. 29)

Blurry or distorted image

(no sound or low volume) ●

Reset channels. (p. 46 - 49)

Unusual image is

displayed

●

Turn the TV off with Mains power On / Off switch, then turn it on again.

●

If the problem persists, initialise all settings. [Shipping Condition] (p. 60)

Sound

No sound is produced ●

Is “Sound mute” active? (p. 10)

●

Is the volume set to the minimum?

Sound level is low or

sound is distorted

●

Sound signal reception may be deteriorated.

●

Set [MPX] (p. 40) in the Sound Menu to [Mono]. (Analogue)

Unusual sound from the

●

When power is on, drive noise may be heard from inside the TV (not a sign of

faulty operation).

Cannot view 3D images

●

Has the 3D Eyewear been switched on, set to 3D mode and registered with

this TV? For details, read the manual of the 3D Eyewear.

●

Check the remaining battery level of the 3D Eyewear. (Battery status is

displayed on the screen when the 3D Eyewear is turned on.)

●

Does the 3D Eyewear support Bluetooth wireless technology? (p. 32)

●

Ensure that [3D Mode Selection] is set to [3D]. (p. 33)

●

Some 3D image signals may not be automatically recognised as 3D images.

Set [3D Mode Selection (Manual)] to match the picture format. (p. 34)

●

Use the 3D Eyewear within approximately 3.2 m from the TV.

●

Check that there are no obstacles between the TV and the 3D Eyewear.

●

For some people, the 3D images may be difficult to see, or cannot be seen,

especially in users who have a different level of eyesight between the left and

right eyes. Take the necessary steps (wearing glasses etc.) to correct your

eyesight before use.

3D Eyewear is turned off

automatically ●

Check that there are no obstacles between the TV and the 3D Eyewear.

There is something wrong

with the 3D images ●

Check the setting of [Picture Sequence] or [Edge Smoother]. (p. 35)

The indicator lamp does

not light when pressing

the power button on the

3D Eyewear

●

The battery may be running low or flat. Recharge it.

HDMI

Sound is unusual

●

Set the sound setting of the connected equipment to “2ch L.PCM”.

●

Check the [HDMI1 / 2 / 3 Input] setting in the Sound Menu. (p. 41)

●

If digital sound connection has a problem, select analogue sound connection.

(p. 102)

Pictures from external

equipment are unusual

when the equipment is

connected via HDMI

●

Check the HDMI cable is connected properly. (p. 95)

●

Turn the TV and equipment off, then turn them on again.

●

Check an input signal from the equipment. (p. 102)

●

Use equipment compliant with EIA/CEA-861/861D.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P55ST50J Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P55ST50J

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info