452147
124
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
On screen messages
124
On screen messages
Message Meaning / Action
All tuning data will be erased
[Shipping Condition] will erase all tuning data (p. 67)
Are you sure ?
Confirm correct operation.
Are you sure you want to
delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may
be necessary to have an aerial installer check the signal and aerial
alignment.
Reset channels. (p. 52, 53)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 64). You must enter
the PIN number before the channel will be displayed.
External (USB-HDD / SD
Card) Recording Due to Start
This message will appear 2 minutes before timer programming
event for external, USB HDD or SD Card recording due to start.
Faulty dish
The satellite cable might be short-circuited or there might be
connection problems of the cable. Check the cable and connection
and then turn the TV Off with the Mains power On / Off switch, and
turn it On again.
If the message still persists, it may be necessary to consult a dish
installer for checking the dish and cable.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect
the recorder to the TV using a fully wired SCART cable for recording
from the TV tuner.
Confirm Q-Link or VIERA Link settings (p. 102 - 105)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the
OK button to view the demonstration to explain how to use it.
Found new software
version
∗∗∗
.
Press OK to start update
(may take over 40 mins) or
press EXIT to ignore and
you can update when TV is
in standby
There is a new software available.
Invalid operation - Please
check settings and
connections.
Check the Q-Link or VIERA Link connection and setting
(p. 102 - 105)
Invalid system time. Please
exit !
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check
time display on Banner
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
Max. number of timers
already set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update
channel list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting [New
Channel Message] to Off in [DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or
local signal availability.
Press OK to start Auto Setup.
Follow the on screen instructions.
Please also refer to p. 121.
If channels are still not found, consult your local Panasonic dealer.
124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic TX-P55VT30E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic TX-P55VT30E

Panasonic TX-P55VT30E Bedienungsanleitung - Deutsch - 128 seiten

Panasonic TX-P55VT30E Bedienungsanleitung - Holländisch - 128 seiten

Panasonic TX-P55VT30E Bedienungsanleitung - Holländisch - 28 seiten

Panasonic TX-P55VT30E Bedienungsanleitung - Polnisch - 128 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info