Bedienungsanleitung Panasonic TX-P60ZT60 (Seite 16 von 72) (Englisch)

511641

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

English

First time Auto Setup

Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.



These steps are not necessary if the setup has been completed by your local dealer.



Please complete connections (p. 8 - 12) and settings (if necessary) of the connected equipment before starting Auto

Setup. For details of settings for the connected equipment, read the manual of the equipment.

Plug the TV into mains socket and turn power on



Takes a few seconds to be displayed.

Select the following items

Set up each item by following the on-screen instructions.

Select the language

Select [Home]

Select [Home] viewing environment to use in your home environment.



[Shop] is for shop display.



To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.

Set up the network connection

Select your country



Depending on the country you select, select your Region or store the Child Lock-PIN number (“0000” cannot

be stored).

Tick the TV signal mode to tune, and then select [Start Auto Setup]

: tune (search for the available channels)

: skip tuning



Auto Setup screen varies depending on the country and the signal mode you select.



[DVB-S Antenna Setup]

Ensure the satellite connections are completed (p. 9) and select the tuner mode ([Dual Tuner] / [Single Tuner]).



[DVB-C Network Settings]

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider

with numeric buttons.

Select [Pairing] and follow the on-screen instructions to use the touch pad controller (supplied).

Confirm the Electronic Touch Pen (optional accessory) introduction screen

Select the type of [Home Screen]

The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by

following the on-screen instructions, and then select the desired [Home Screen].

Example: [Home Screen Selection] Example: [TV Home Screen]



[my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the network, Satellite cable, RF cable, and then follow the on-screen

instructions.

Note



The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the

Timer Menu is set to [On].



The TV will automatically go into Standby mode when no signal is received and no operation is performed for

10 minutes if [No signal Power off] in the Timer Menu is set to [On].



To retune all channels

[Auto Setup] in [Tuning Menu] (Setup Menu)



To add the available TV signal mode later [Add TV Signal] in [Tuning Menu] (Setup Menu)



To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX-P60ZT60 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX-P60ZT60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info