Bedienungsanleitung Panasonic tx pf42g10 (Seite 50 von 64) (Englisch)

144313

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Link Functions

(

Q-Link

VIERA Link

)

Direct TV Recording - What you see is What you record

Direct TV Rec

Recording the current programme in DIGA Recorder immediately.

If you connect a variety of recorders including other manufacturers’ recorders at the same time, please ●

connect DIGA Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2

for two recorders, in this case connect DIGA Recorder to HDMI1.

If you cannot operate, check the settings and the equipment ●

“Summary of Q-Link and VIERA Link features” (p. 46 and p. 47), “Preparations” (p. 49)

SCART connection is required to record the DVB-C programme. ●

Changing channel or turning off the TV is available while the recorder is recording from its own tuner. ●

Changing channel is not available while the recorder is recording from the TV tuner. ●

EXIT

DIRECT TV REC

Display “VIERA Link Menu”

Select “Direct TV Rec” and start recording

Direct TV Rec

Speaker Selection

VIERA Link Menu

Home Cinema

Start

VIERA Link Control

Speaker Selection

Home Cinema

Recorder

Pause Live TV

select

start

You can also start recording directly ●

DIRECT TV REC

To stop recording ■

Select “Stop” in “Direct TV Rec” and access

Direct TV Rec

Speaker Selection

VIERA Link Menu

Home Cinema

Stop

VIERA Link Control

Speaker Selection

Home Cinema

Recorder

Pause Live TV

select

stop

You can also stop recording directly. ●

Unlock the tuner

Unlock

Continue

Tuner Locked

Please stop recording to operate

EXIT

Features available ■ (Using VIERA Link Menu)

Features available ■

Reduce unnecessary power consumption in standby

Standby Power Save

Set Standby Power Save “On” in the Setup Menu to use this function

“Standby Power Save” (p. 28)

The power consumption in Standby mode of the connected equipment is controlled higher or lower in

synchronization with the TV On / Off state to reduce the consumption.

When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power

consumption in Standby mode of the connected equipment is automatically minimized.

When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is

increased to make startup time early.

This function is effective if the connected equipment can change the power consumption in Standby mode ●

and is set to higher consumption.

This function will work when “Power off Link” is set to “On”. ●

Auto standby for unnecessary equipment

Intelligent Auto Standby

Set Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu to

use this function

“Intelligent Auto Standby” (p. 28)

When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically

to reduce the power consumption. For example, when the input mode is switched from HDMI, when Speaker

Selection is changed to “TV” (except for watching a disc).

If you select “On (With reminder)”, the on screen message will be displayed to be noticed before working this

●

function.

This function may not work properly depending on the connected equipment. If required, set to “Off”. ●

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic tx pf42g10 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info