Bedienungsanleitung Panasonic TX42AS600Y (Seite 14 von 68) (Englisch, Italienisch)

564053

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English

Tick the TV signal mode to tune, and then select

[Start Auto Setup]

: tune (search for the available channels)

: skip tuning

●

Auto Setup screen varies depending on the country

and the signal mode you select.

●

[DVB-C Network Settings]

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter

[Frequency] and [Network ID] specified by your cable

provider with numeric buttons.

3 Select the type of [Home Screen]

The demonstration to explain how to use [my Home

Screen] is displayed. Confirm the demonstration by

following the on-screen instructions, and then select the

desired [Home Screen].

Example: [Home Screen Selection]

Example: [TV Home Screen]

Auto Setup is now complete and your

TV is ready for viewing.

If tuning has failed, check the connection of the network,

RF cable, and then follow the on-screen instructions.

Note

●

The TV will automatically go into Standby mode

when no operation is performed for 4 hours if [Auto

Standby] in the Timer Menu is set to [On].

●

The TV will automatically go into Standby mode when

no signal is received and no operation is performed

for 10 minutes if [No signal Power off] in the Timer

Menu is set to [On].

●

To retune all channels

[Auto Setup] in [Tuning Menu] (Setup Menu)

●

To add the available TV signal mode later

[Add TV Signal] in [Tuning Menu] (Setup Menu)

●

To initialise all settings

[Shipping Condition] in [System Menu] (Setup

Menu)

First time Auto Setup

Automatically sets up the TV and searches for available

TV channels when the TV is turned on for the first time.

●

These steps are not necessary if the setup has been

completed by your local dealer.

●

Please complete connections (p. 8 - 11) and settings

(if necessary) of the connected equipment before

starting Auto Setup. For details of settings for the

connected equipment, read the manual of the

equipment.

1 Plug the TV into mains socket and

turn power on

●

Takes a few seconds to be displayed.

2 Select the following items

Set up each item by following the on-screen instructions.

Example:

Please select your viewing environment.

Home Shop

■ How to use remote control

Move the cursor

Access the item / store the setting

Return to the previous item (if available)

Select the language

Select [Home]

Select [Home] viewing environment to use in your home

environment.

●

[Shop] is for shop display.

●

To change viewing environment later on, you will

need to initialise all settings by accessing Shipping

Condition.

Set up the network connection

Select your country

●

Depending on the country you select, select your

Region or store the Child Lock-PIN number (“0000”

cannot be stored).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TX42AS600Y Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TX42AS600Y

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info