Bedienungsanleitung Panasonic UB-T880 (Seite 26 von 56) (Englisch)

628498

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Usage

26 Operating Instructions

Starting the elite Panaboard

software

When the elite Panaboard software is installed, the

icon is displayed in the notification area when

calibration is finished, and you can use the elite

Panaboard software.

• To display the Select Function Menu, click the Menu

Start Tab (left side: / right side: ) on the screen

with your finger.

• To display the Drawing Menu, touch the screen

board while holding the menu button on the

electronic pen.

Note

• When the elite Panaboard software is not

installed, the icon is not displayed in the

notification area. The Menu Start Tab and

Drawing Menu of the electronic pen are not

displayed on the screen.

• For detailed information about using the elite

Panaboard software, refer to the help menu. For

details on accessing the help information, see

“Viewing the Help of the Software” (page 27).

Starting the elite Panaboard book

The elite Panaboard book can be started in the

following ways.

• If the elite Panaboard software has been installed,

click the icon in Select Function Menu.

• Double-click the desktop icon of (elite

Panaboard book).

• Click [Start] → [All Programs] → [Panasonic] → [elite

Panaboard] → [elite Panaboard book].

After Calibration

Do Not Move the elite Panaboard or the

Projector

•

The following changes will bring the position of

projection out of alignment with the position of your

finger or the electronic pen, and you will need to

recalibrate the equipment.

– The location of the projector changed.

– The location of the elite Panaboard changed.

– The image area or placement was changed due

to changes in the zoom, focus, etc.

– The resolution of the projector or the computer

changed.

(The resolution may be changed when

you turn on your computer display.)

• If you are using the elite Panaboard installed on a

stand, be aware that accidentally hitting the elite

Panaboard or pushing too strongly with the

electronic pen while operating can move the stand’s

position, which will result in misalignment of the

projected image and the electronic pen’s position.

• Make sure to lock the stand’s casters when using the

elite Panaboard, as failing to do so can cause

misalignment.

Performing the Recalibration (Displaying the

Calibration Screen Manually)

•

When the elite Panaboard software is already

installed:

– Click the icon in the notification area and click

[Calibration] in the pop-up menu.

• When the elite Panaboard software is not installed:

– Double-click the desktop icon of (elite

Panaboard Calibration Tool).

Exiting the elite Panaboard software

Click on the icon in the notification area, and select

[Exit] from the menu.

Example of the Select Function Menu

Example of the Drawing Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic UB-T880 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic UB-T880

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info