Bedienungsanleitung Panasonic WV-SC384 (Seite 130 von 244) (Englisch)

550986

130

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

[Audio bit rate]

Select “16kbps” or “32kbps” for the audio bit rate used to transmit/receive audio data.

• Default: 32kbps

Note

• When selecting a smaller value for “Bandwidth control(bit rate)” (®page 166) while putting a priority

on the JPEG/H.264(MPEG-4) image transmission, select “16kbps” for “Audio bit rate”.

• [Audio bit rate] is unavailable when “G.711” is selected for “Audio encoding format”.

[Mic input volume (Camera to PC)]

Select a volume level on the PC to hear audio transmitted from the camera.

• Mic High: The volume level will become high. This setting will be applied when audio is input to the camera

using a microphone.

• Mic Middle: The volume level will become middle. This setting will be applied when audio is input to the

camera using a microphone.

• Mic Low: The volume level will become low. This setting will be applied when audio is input to the camera

using a microphone.

• Line High: The volume level will become high. This setting will be applied when audio is input to the camera

using the Line input.

• Line Middle: The volume level will become middle. This setting will be applied when audio is input to the

camera using the Line input.

• Line Low: The volume level will become low. This setting will be applied when audio is input to the camera

using the Line input.

• Default: Mic Middle

[Mic input interval (Camera to PC)]

Select an interval for audio reception from the following.

20ms/ 40ms/ 80ms/ 160ms

• Default: 40ms

Note

• When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,

audio interruption may be diminished even though the delay time will be longer. Select the interval

according to the network environment.

[Audio output volume (PC to Camera)]

Select a volume level on the camera to hear audio transmitted from the PC.

High/ Middle/ Low

• Default: Middle

[Audio output interval (PC to Camera)]

Select an interval for audio transmission from the following.

160ms/ 320ms/ 640ms/ 1280ms

• Default: 640ms

Note

• When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,

audio interruption may be diminished even though the delay time will be longer. Select the interval

according to the network environment.

• Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the

camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval

for “Audio output interval (PC to Camera)”.

• Audio may sometimes not be heard depending on the network environment.

130 Operating Instructions

11 Configure the settings relating to images and audio [Image/Audio]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info