Bedienungsanleitung Panasonic WV-SC384 (Seite 181 von 244) (Englisch)

550986

181

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

In advance, install the root certificate and intermediate certificate on the browser in use. Follow the

instructions of CA for how to obtain and install these certificates.

• When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of images

may be lower.

• When the camera is accessed using the HTTPS protocol, it may take time to display images.

• When the camera is accessed using the HTTPS protocol, the images may be distorted or audio may

be interrupted.

• When the camera is accessed using the HTTPS protocol, the number of users that can access the

camera may be reduced. The maximum number of concurrent access user varies depending on the

maximum image size and transmission format.

17.3 Access the camera using the HTTPS protocol

Note

• SW395R, SC385R, and SC384R do not support the HTTPS function.

1. Start up the web browser.

2. Enter the IP address of the camera in the address box of the browser.

• Example of entry: https://192.168.0.10/

IMPORTANT

• When the HTTPS port number is changed from “443”, enter “https://IP address of the camera + :

(colon) + port number” in the address box of the browser.

(Example: https://192.168.0.11:61443)

• When the camera is in a local network, configure the proxy server setting of the web browser (under

[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.

3. Press the [Enter] key on the keyboard.

→ The “Live” page will be displayed.

When the security alert window is displayed, install the security certificate. (®page 182 - page 188)

When “On” is selected for “User auth.”, the authentication window will be displayed before displaying

live images for the user name and password entries.

IMPORTANT

• When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of

images may be lower.

17.3.1 Install the security certificate

When the security certificate of the camera to access is not installed on the PC, the security alert window will

be displayed each time the camera is accessed using the HTTPS protocol. To have the security alert window

not displayed, it is necessary to install the security certificate in the following procedure. If the certificate is not

installed, the alert window will be displayed each time the camera is accessed.

Note

• The security certificate is installed on the PC with the information registered for “Common Name”.

Therefore, the information registered for “Common Name” must be same as the address or host name

for the camera access. If the certificate is not the same, the security alert window will be displayed

each time the camera is accessed.

• When the address or host name of the camera is changed, the security alert window will be displayed

each time the camera is accessed even if the security certificate is installed. Install the security

certificate again.

Operating Instructions 181

17 Configuring the network settings [Network]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic WV-SC384 Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic WV-SC384

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info