Bedienungsanleitung Pantech Burst P 9070 (Seite 86 von 90) (Englisch)

597969

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Appendix

are more immune than others to this interference noise, and

phones also vary in the amount of interference they generate.

The wireless telephone industry has developed a rating system

for wireless phones, to assist hearing device users find phones

that may be compatible with their hearing devices. Not all

phones have been rated. Phones that are rated have the rating

on their boxes or a label located on the boxes.

The ratings are not guarantees. Results will vary depending

on the user’s hearing device and hearing loss. If your hearing

device happens to be vulnerable to interference, you may not

be able to use a rated phone successfully. Trying out the phone

with your hearing device is the best way to evaluate it for your

personal needs.

x M-Ratings: Phones rated M3 or M4 meet FCC requirements

and are likely to generate less interference to hearing

devices than phones that are not labeled. M4 is the better/

higher of the two ratings.

x T-Ratings: Phones rated T3 or T4 meet FCC requirements

and are likely to generate less interference to hearing

devices than phones that are not labeled. T4 is the better/

higher of the two ratings.

Hearing devices may also be rated. Your hearing device

manufacturer or hearing health professional may help you

find this rating. Higher ratings mean that the hearing device is

relatively immune to interference noise. The hearing aid and

wireless phone rating values are then added together. A sum

of 5 is considered acceptable for normal use. A sum of 6 is

considered for best use.

In the above example, if a hearing aid meets the M2 level rating

and the wireless phone meets the M3 level rating, the sum of

the two values equals M5. This is synonymous for T ratings.

This should provide the hearing aid user with “normal usage”

while using their hearing aid with the particular wireless phone.

“Normal usage” in this context is defined as a signal quality that

is acceptable for normal operation.

The M mark is intended to be synonymous with the U mark.

The T mark is intended to be synonymous with the UT mark.

The M and T marks are recommended by the Alliance for

Telecommunications Industries Solutions (ATIS). The U and

UT marks are referenced in Section 20.19 of the FCC Rules. The

HAC rating and measurement procedure are described in the

American National Standards Institute (ANSI) C63.19 standard.

To ensure that the Hearing Aid Compatibility rating for

your phone is maintained, secondary transmitters such as

Bluetooth and WLAN components must be disabled during a

call. See page 24 for instructions to disable these components.

This phone has been tested and rated for use with hearing

aids for some of the wireless technologies that it uses.

However, there may be some newer wireless technologies

used in this phone that have not been tested yet for use with

hearing aids. It is important to try the different features of

this phone thoroughly and in different locations, using your

hearing aid or cochlear implant, to determine if you hear any

interfering noise. Consult your service provider about its return

and exchange policies and for information on hearing aid

compatibility.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pantech Burst P 9070 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info