Bedienungsanleitung Paradigm AMS-100RX (Seite 4 von 24) (Englisch, Französisch)

567937

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SPEAKER PLACEMENT GUIDELINES (all models)

For placement of ADP

™

Surround/Rear speakers see the additional placement guidelines that follow farther

below. If your speakers have ‘SM’ in their model name, or feature a Guided Soundfield

™

, also see placement

options and additional recommendations beginning farther down the page.

Location

When installing your speaker, pick a location between studs or ceiling joists. Be careful not to damage any

wires when you cut the installation hole.

Accurate Timbre and Imaging

Our in-wall/in-ceiling speakers feature wide, uniform dispersion and can be installed almost anywhere. For

the most accurate timbre and imaging however, place stereo pairs approximately equal distance apart and

select locations that allow sound to reach the listening area unobstructed.

Bass Performance

Placing speakers near corners will emphasize bass. For more balanced sound, we recommend avoiding

corners when considering speaker placement.

Placement of ADP

™

Surround/Rear Speakers

Paradigm

Reference ADP

™

in-wall/in-ceiling Surround/Rear speakers accurately reproduce the ambience

and sound effects critical to achieving the full dimension of multichannel sound. They are full bandwidth

designs, precisely timbre-matched to Paradigm

front and center speakers to ensure a seamless

multichannel soundstage in a large, reverberant soundfield.

5.1 Surround Placement

Mount your ADP

™

surround speakers on either side of the main listening area (Fig. 1a).

6.1 Surround/Rear Placement

Begin with the 5.1 surround configuration outlined above, then mount one speaker in the center rear, behind

the primary listening area (Fig. 1b).

7.1 Surround/Rear Placement

Begin with the 5.1 surround configuration outlined earlier. Place another pair of ADP

™

speakers behind the primary

listening area: one speaker positioned slightly right of the seating position and the other slightly left (Fig. 1c).

Placement Options for ‘SM’ Models

Paradigm

and Paradigm

Reference ‘SM’ speakers offer two options for connection:

• Stereo Input: Wide dispersion “Left plus Right” channel sound from a single ‘SM’ speaker.

• Mono Input: Very wide dispersion stereo sound from two ‘SM’ speakers, one for the left, and one for the right.

With their Dual-Directional Soundfield

™

, ‘SM’ speakers provide wider than normal dispersion, allowing them

to be used in a variety of applications:

Single Speaker, Wide Dispersion “Left plus Right” Channel Sound (Fig. 2a)

Ideal in smaller areas less suited to a stereo pair of speakers or where a single speaker is the preferred

choice. The speaker is connected to both left and right amplifier channels. Position speakers to achieve the

broadest sound coverage across the main listening area.

Multiple Speakers, Distributed “Left plus Right” Channel Sound (Fig. 2b)

In larger areas (offices, on the boat deck, etc.) multiple speakers (each wired for “Left plus Right” channel

sound) may be used to eliminate the sound imbalances that occur with separate stereo speakers as people

move around, or are seated closer to one speaker than the other. Position speakers to achieve the broadest

sound coverage across the main listening area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Paradigm AMS-100RX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info