Bedienungsanleitung Paradyne FrameSaver NP 110 (Seite 15 von 175) (Englisch)

458602

Zoom out

Zoom in

Vorherige Seite

1/175

Nächste Seite

1 Preface

1-4 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B

November

2000

FCC Part 68

(U.S.)

This equipment complies with Part 68 of the FCC Rules. On the underside of this

equipment is a label that contains, among other information, the FCC registration num-

ber and Ringer Equivalence Number (REN) for this equipment. If requested, this in-

formation must be provided to the telephone company.

This equipment uses the following USOC jacks: RJ11C, RJ48C and RJ49C (optional).

This equipment is designed to be connected to the telephone network using compatible

modular plugs which are Part 68 compliant. See installation instructions for details.

The REN is used to determine the quantity of devices which may be connected to the

telephone line. Excessive RENs on the telephone line may result in the devices not

ringing in response to an incoming call. In most, but not all areas, the sum of RENs

should not exceed five (5.0). To be certain of the number of devices that may be con-

nected to a line, as determined by the total RENs, contact the local telephone company.

If the FrameSaver NP 110 equipment causes harm to the telephone network, the tele-

phone company will notify you in advance that temporary discontinuance of service

may be required. But if advance notice isn’t practical, the telephone company will no-

tify the customer as soon as possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or

procedures that could affect the operation of the equipment. If this happens the tele-

phone company will provide advance notice in order for you to make necessary mod-

ifications to maintain uninterrupted service.

If trouble is experienced with this FrameSaver NP 110 equipment, for repair or war-

ranty information, please contact Paradyne Corporation, 16-00 Pollitt Drive, Fair

Lawn, New Jersey 07410, (201) 703-4800. If the equipment is causing harm to the tele-

phone network, the telephone company may request that you disconnect the equipment

until the problem is resolved.

There are no user-replaceable parts that may be serviced inside the FrameSaver NP

110.

This equipment cannot be used on public coin phone service provided by the telephone

company. Connection to party line service is subject to state tariffs. (Contact the state

public utility commission, public service commission or corporation commission for

information.)

Table 1-1 FCC Re

istration Information

Port FIC SOC REN

Network

USOC

Modem Line

(Dial Line)

02LS2 9.0Y 0.7B RJ11C

T1 Line with

D4 Framing

04DU9-B 6.0N --- RJ48C

T1 Line with

ESF Framing

04DU9-C 6.0N --- RJ48C

T1 Line with

ESF Framing

B8ZS Line Code

04DU9-S 6.0N --- RJ48C

ISDN Line 02IS5 6.0Y --- RJ49C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Paradyne FrameSaver NP 110 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info