458602
69
Zoom out
Zoom in
Vorherige Seite
1/175
Nächste Seite
5 Diagnostics
5-2 NetPath 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Table 5-1 FrameSaver NP 110 Front Panel Indicators
Nomenclature Description Function
UNIT POWER Green LED ON indicates unit is receiving proper operating voltages.
UNIT READY Green LED Steady ON, indicates base unit has successfully passed its
internal self-test.
FLASHING, indicates the unit is performing the self-test.
OFF after self-test (test time approx. 60 sec.), indicates a
hardware failure was detected during the self-test.
UNIT TEST Red LED ON, indicates the data path is disrupted by a currently
active test (user or telco initiated).
UNIT FRM MGMT. Green LED ON momentarily whenever a message is received on the
Management Channel PVC.
FLASHING simultaneously with NETW ALARM LED,
indicates software download* in process.
UNIT MODEM IN
USE
Green LED Steady ON, indicates the modem is connected to a port.
FLASHING, indicates ringing is incoming on the Dial
Line, or the modem is dialing out.
OFF, indicates on-hook
NETW ALARM Red LED Steady ON, indicates WAN facility (T1 loop) is not
receiving properly framed T1 data or is detecting red,
blue, or yellow alarm conditions.
Flashing indicates errors are being detected at the
Network Port (ES, SES, BES, UAS, LOFC, or CSS.)
FLASHING simultaneously with FR MGMT. LED,
indicates software download* in process.
NETW LMI Green LED ON, indicates LMI packets are being exchanged correctly
with the network.
FLASHING indicates some, but not all LMI packets are
being exchanged correctly with the network.
OFF indicates no LMI packets are being exchanged.
USER LMI Green LED ON, indicates LMI packets are being exchanged correctly
with the DTE.
FLASHING indicates some, but not all LMI packets are
being exchanged correctly with the DTE.
OFF indicates no LMI packets are being exchanged.
USER PORT TxD Green LED ON, indicates High Speed data is being Sent to local DTE
(Router).
USER PORT RxD Green LED ON, indicates High Speed data is being Received from
local DTE (Router).
* See Software Download at the end of this section for description.
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Paradyne FrameSaver NP 110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info