Bedienungsanleitung Parkside IAN 114254 PWS 125 B2 (Seite 10 von 122) (Deutsch, Englisch, Holländisch, Dänisch, Schwedisch)

745332

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Attachment tools which are wrongly

dimensioned cannot be sufciently shiel-

ded or controlled.

• Attachment tools with threaded

attachment must t the threa-

ding of the grinding spindle ex-

actly. For attachment tools which

are mounted through a ange,

the diameter of the hole in the

attachment tool must t the

mounting diameter of the ange.

Attachment tools which cannot be pre-

cisely attached to the electric tool turn

unevenly, vibrate very strongly and can

ultimately lead to a loss of control.

• Never use damaged attach-

ment tools. Check attachment

tools such as grinding discs for

chipping or cracks, grinding pla-

tes for cracks, wear or strong

abrasion and wire brushes for

loose or broken wires before

using them. If the electric tool

or the attachment tool falls off,

check whether it is damaged or,

use an undamaged attachment

tool. If you have checked the

attachment tool and attached it,

keep yourself and any nearby

persons beyond the level of the

rotating attachment tool and al-

low the device to run for 1 min.

at the highest rotational speed.

Damaged tools usually break during this

test period.

• Wear personal safety equip-

ment. Depending on the appli-

cation, use full face shields, eye

protection or safety goggles. In

so far as it is appropriate, wear

dust masks, ear protection,

gloves or special aprons which

keep small grinding and materi-

al particles away from you. Eyes

should be protected from the foreign

matter which can be caused to y du-

ring the various applications. Dust or

breathing masks should lter the dust

that is created during operation. If you

are exposed to loud noise for a long

time, you may suffer hearing loss.

• Ensure that other people are

at a safe distance to your wor-

king area. Anyone who enters

the working area should wear

personal protective equipment.

Broken bits from the piece being worked

or broken attachment tools can y away

and cause injuries even beyond the di-

rect working area.

• Hold the electric tool only by

the insulated gripping surfaces

when performing work in which

the cutting tool may come into

contact with hidden wiring or its

own cord. Contact with a live wire

can also cause a charge in metal parts

of the device and result in an electric

shock.

• Keep the cord away from the ro-

tating attachment tool. If you lose

control of the device, the power cord

can become separated or caught and

your hand or arm may be pulled into

the rotating attachment tool.

• Never put the electric tool down

before the attachment tool has

come to a full stop. The rotating

attachment tool can come into contact

with the surface upon which it is set,

whereby you could lose control of the

electric tool.

• Never allow the electric tool to

run whilst you are carrying it.

Your clothing may accidentally come

into contact with the rotating attachment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 114254 PWS 125 B2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info