Bedienungsanleitung Parkside IAN 270420 PHKSA 18 Li B2 (Seite 36 von 44) (Französisch)

745234

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PHKSA 18-Li B2

b) Only the rechargeable battery units supplied

are to be used with the power tools. The use

of other rechargeable battery units may result

in injury or a ﬁre hazard.

c) When they are not being used, store recharge-

able battery units away from paper clips, coins,

keys. nails, screws or other small metal objects

that could cause the contacts to be bridged.

Short-circuiting the contacts of a rechargeable

battery unit may result in burns or ﬁre.

d) Fluid may leak out of rechargeable battery

units if they are misused. If this happens, avoid

contact with the ﬂuid. If accidental contact

occurs, rinse the aﬀected area with water.

Seek additional medical help if any of the

ﬂuid gets into your eyes. Escaping battery

ﬂuid may cause skin irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the battery against heat, e. g.,

against continuous intense sunlight,

ﬁre, water and moisture.

Danger of explosion.

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Appliance-speciﬁc safety instructions

for circular saws

Safety instructions for all saws

Cutting procedures

a) DANGER! Keep hands away from

cutting area and the blade. Keep

your second hand on auxiliary

handle, or motor housing. If both hands are

holding the saw, they cannot be cut by the blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from the blade below

the workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade

teeth should be visible below the workpiece.

d) Never hold piece being cut in your hands

or across your leg. Secure the workpiece to

a stable platform. It is important to support

the work properly to minimise body exposure,

blade binding, or loss of control.

e) Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting tool may contact hidden

wiring. Contact with a “live” wire will also

make exposed metal parts of the power tool

“live” and could give the operator an electric

shock.

f) When ripping, always use a rip fence or

straight edge guide. This improves the accuracy

of cut and reduces the chance of blade binding.

g) Always use saw blades with correct size and

shape (diamond versus round) of arbour

holes. Blades that do not match the mounting

hardware of the saw will run eccentrically, caus-

ing loss of control.

h) Never use damaged or incorrect blade

washers or bolts. The blade washers and bolt

were specially designed for your saw, for opti-

mum performance and safety of operation.

Further safety instructions for all saws

Kickback causes and related warnings

▯ A kickback is a sudden reaction to a pinched,

bound or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the work-

piece toward the operator;

▯ when the blade is pinched or bound tightly

by the kerf closing down, the blade stalls and

the motor reaction drives the unit rapidly back

toward the operator;

▯ if the blade becomes twisted or misaligned in

the cut, the teeth at the back edge of the blade

can dig into the top surface of the wood causing

the blade to climb out of the kerf and jump

back toward the operator.

Kickback is the result of saw misuse and/or incor-

rect operating procedures or conditions and can

be avoided by taking proper precautions as given

below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 270420 PHKSA 18 Li B2 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 270420 PHKSA 18 Li B2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info