Bedienungsanleitung Parkside IAN 270433 PHD 150 D3 (Seite 9 von 102) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch)

745335

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

ow preventer in conformity with EN

12729 type BA must be used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available in spe-

cialist shops.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

• Use the device on a domestic water

connection with an output of at least

450 l/h.

• Irrespective of the water pipe, you can

also use the device (for example, rain

barrel) through the integrated water

suction function. This function must only

be used with a suction hose with a l-

ter basket.

The device itself must not be immer-

sed in open water sources. There

is a risk of personal injury from an

electric shock.

Do not draw in any water from na-

tural accumulations. There is a risk

of contamination from backwashed

cleaning agent.

Setting up

1. Fold the handle after upwards until

it engages with a resistor. Insert the

crank of the reel (12) to the stop into

the hose drum. The handle clicks into

place. Fold out the handle of the crank.

It xed via a resistor.

2. Slide the holder for mains cable (11)

and the jet gun holder (4) onto the

guides on the device housing.

3. Connect the high-pressure tting (jet

gun) (2) to the jet gun (1). Use the fork

spanner from the package. Ensure that

the hose runs to the front, so as not to

impede the handle (14).

4. Connect the feed hose to the water

supply and allow water to escape from

the other end of the feed hose with no

bubbles, in order to expel the air from

the feed hose. Switch off the water tap.

5. Connect the feed hose with the help of

the quick connector for garden hose

adapter (15) with the water connection

coupling (9) and the water connection

(10) on the device. Always use the l-

ter insert (8) and clean this as required

(bayonet xing).

6. Plug in and turn the turbo dirt blaster

(18) or the standard Vario nozzle (19)

or the rotating wash brush (20) to con-

nect to the jet gun (1).

7. To change the jet tube (18/19) or the

rotating wash brush (20) push in the

tube or brush and turn in the opposite

direction.

The roles of the unit, use the handle

(14) only in conjunction with the

wheels (7). For lifting and carrying

use the carrying handle (13).

Mains connection

The pressure cleaner you have acquired

is already tted with a mains plug. The

equipment is designed for connection to

an earthed wall socket with a residual

current operated device (RCD switch) at

230V~50Hz.

Only operate the pressure cleaner

after all the above points have been

observed.

1. Ensure that the pressure cleaner is

turned off by its ON / OFF switch (6).

2. Insert the mains plug into the mains

socket

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 270433 PHD 150 D3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info