Bedienungsanleitung Parkside IAN 270703 PDOS 200 B2 (Seite 22 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

745343

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

Technical specications

Nominal input voltage ......230 V~, 50 Hz

Power consumption ..200 W (S2 30 min)*

Safety class ..........................................I

Mechanical rating .......................... IP 20

Measurement idling speed n

... 2950 min

-1

Velocity v

.......................... max. 23 m/s

Grinding disc

Outer diameter ...................Ø 150 mm

Bore hole ..........................Ø 12.7 mm

Thickness .................................20 mm

Hardness ....................................... P5

Grain size ................................36/80

Speed n0 ................... max. 4500 rpm

-1

Working speed ................ max. 35 m/s

Weight (incl. accessories) .. approx. 6.7 kg

Sound pressure level

) ....................... 80 dB(A); K

=3 dB

Sound power level (L

)

measured .............. 93 dB(A); K

=3 dB

Vibration total value (a

) ......... 2.5 m/s

* A break is introduced after 30 minutes of

uninterrupted operating duration until the de-

vice temperature differs 2 K (2°C) less than

room temperature.

Noise and vibration values have been

determined according to the standards and

regulations mentioned in the declaration of

conformity. Technical and optical changes

may be undertaken in the course of further

development without notice. All dimen-

sions, references and information in this

instruction manual are therefore not guar-

anteed. Legal claims made on the basis of

the instruction manual can therefore not be

considered as valid.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

Warning! The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Safety precautions aimed at protect-

ing the user should be based on

estimated exposure under actual

usage conditions (all parts of the

operating cycle are to be consid-

ered, including, for example, times

during which the power tool is

turned off and times when the tool

is turned on but is running idle).

Safety Instructions

WARNING!

When using power tools, observe

the following basic safety measures

for the prevention of electric shocks

and the risk of injury and re.

Please read all these instructions

before using the electric tools and

please keep the safety instructions.

Symbols and icons

Symbols in the manual:

Warning symbols with in-

formation on damage and

injury prevention.

Instruction symbols (the instruction is

explained at the place of the excla-

mation mark) with information on

preventing damage.

Help symbols with information on

improving tool handling.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 270703 PDOS 200 B2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info