745341
14
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
11
PTS 500 A1
GB
IE
HW circular saw blade Z85 / 30:
Description: ø 85 mm, 30 HW teeth Suitability:
soft wood, hard wood, any kind of panel, plastics
Diamond-coated cutting saw blade
Z85VR:
Description: ø 85 mm, full edge disc Suitability:
ceramics, plastics
HS circular saw blade
Z85 / 36:
Description: ø 85 mm, 36 teeth – cross-cut left
/ right Suitability: soft wood, soft metal such as
aluminium, copper, plastics
Markings for cut length
Use the markings for the max. cut length , to
check where your cut starts and ends.
Markings for cutting line
The viewing window for the cutting line helps you
accurately guide machine along the cutting line on
the workpiece.
For a true to size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line
.
Connecting the sawdust extraction
device
Push the suction hose onto the dust extractor
connector .
Attach an approved dust and sawdust extractor
to the suction hose
.
Changing the saw blade
1. Actuate the spindle lock and use the Allen
key to loosen the clamping screw (turn
clockwise to open). Now remove the clamping
screw and washer and the clamping flange
(see also Fig. B).
2. Set the cutting depth to the maximum position.
3. Swivel the base plate
up.
4. Remove the saw blade
.
5. Fit the saw blade in the reverse order as de-
scribed.
6. Actuate the spindle lock
(until it engages)
and use the Allen key to tighten the clamping
screw
.
The arrow on the saw blade must correspond to
the arrow showing the direction of rotation
(running direction shown on the device).
Cleaning and maintenance
WARNING! RISK OF INJURY! Always
remove the power plug from the
mains power socket before carrying
out any work on the appliance.
Always clean the appliance after finishing work.
For cleaning the housing use a cloth, under no
circumstances should you use petrol, solvents or
cleaning agents.
Disposal
The packaging is made from environment-
ally friendly material and can be disposed
off at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
used power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 273278 PTS 500 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info