Bedienungsanleitung Parkside IAN 273460 PTK 2000 B2 (Seite 33 von 204) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

745555

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

GB IE

Intended purpose

The table circular saw is used for cutting all

types of wood lengthwise and crosswise

(only with the transverse stop), depending

on the machine size. All types of round

timbers must not be cut with it. The ma-

chine may be used only for its prescribed

purpose.

Any other use beyond that is considered to

be not in accordance with the designated

purpose. The user/operator is liable for all

types of resulting damage or injury and not

the manufacturer.

The only saw blades which may be used

are those which are suitable for the machi-

ne (HM or CV saw blades).

The use of any type of HSS saw blades

and cutting discs is prohibited. Use in ac-

cordance with the designated purpose is

also deemed to include observance of the

safety instructions, as well as the assembly

and operating instructions in the opera-

ting manual.Individuals who operate and

maintain the machine must be familiar with

it and must have been instructed in possi-

ble hazards. Moreover, the latest accident

prevention regulations must be strictly ob-



occupational health and safety technology

must be complied with.

Caution!

When using equipment, certain safety

precautions must be complied with in order

to avoid injuries and damage. You should

therefore read these operating instructions

/ safety instructions carefully. Keep these

in a safe place so that the information is

available to you at all times. Should you

give the device to anyone else, please give

them these operating instructions / safety

instructions as well. We assume no liability

for accidents or damage caused by failure

to observe these instructions or the safety

instructions. Changes to the machine will

cause the manufacturer‘s liability with

respect to any resulting damage to be com-

pletely excluded. Even when the device is

used in accordance with the designated

purpose, it is nevertheless not possible to

completely eliminate certain residual risk

factors. Due to the design and structure of

the machine, the following risks may occur:

• Touching the saw blade in the area of

the saw which is not covered;

• Reaching into the running saw blade

(cuts)

• Kickback of workpieces and workpiece

parts.

• Saw blade breaks.

• Ejection of faulty hard metal parts of

the saw blade.

• Hearing damage if the necessary hea-

ring protection is not used.

• Emissions of wood dust which are

harmful to the health when used in clo-

sed rooms.

Please note that the use of our devices in

accordance with the designated purpose

does not include commercial, handicraft or

industrial applications. We assume no war-

ranty if the device is used in commercial,

handicraft or industrial businesses or for

equivalent purposes..

General description

Extent of the delivery

Carefully unpack the appliance and check

that it is complete:

- - Saw table with pre-assembled, carbide-

tipped saw blade with 24 teeth

- Carbide-tipped saw blade with 48 teeth

- Blade guard

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273460 PTK 2000 B2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info