Bedienungsanleitung Parkside IAN 273479 PSSA 18 A1 (Seite 10 von 64) (Deutsch, Englisch, Holländisch)

745467

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

G B

1 0

I E

contact with the blade there is a risk of

injury.

• Only when the electric tool is

turned on should the sawing

blade be moved against the

work piece. There is a risk of kick-

back if the tool insert jams in the work

piece.

• Make sure that the base plate

is securely placed against the

work piece during sawing. The

saw blade can tilt and lead to loss of

control over the power tool.

• After you have nished work,

turn the power tool off and do

not pull the saw blade out of the

cut until it has come to a stand-

still. In this way you will avoid any

kickback and can safely put down the

power tool.

• Use only undamaged saw

blades in perfect condition. Bent

or blunt blades can break, adversely

affect the cut or cause kickback.

• Do not brake the saw blade

after switching the device off

by applying side pressure. The

saw blade may be damaged, break or

cause a kickback.

• Tighten the material rmly. Do

not support the work piece by

hand or foot. Do not touch any

objects or the ground with the

saw running. There is a risk of kick-

back.

• Use suitable detectors in order

to nd hidden supply lines or

ask the local utility company.

Contact with electrical cables can lead

to electric shock and re, contact with

a gas pipe can result in an explosion.

Damage to a water pipe can lead to

property damaged and electric shock.

• Hold the power tool tightly with

both hands while working and

ensure a secure footing. The pow-

er tool is guided more securely with

both hands.

• Secure the work piece. A work

piece that is retained with clamping

devices or a vice is held more securely

than with your hand.

• Wait until the power tool has

stopped before placing it down.

The tool insert can tilt and lead to loss

of control over the power tool.

• Do not saw any materials (e.g.

lead-based paints and coatings

or materials containing asbes-

tos) whose dust can be harmful.

2) SPECIAL SAFETY DIRECTIONS FOR

BATTERY-OPERATED TOOLS

• Ensure that the device is

switched off before inserting

the battery. Inserting a battery into

a power tool that is switched on may

result in accidents.

• Recharge the batteries indoors

only because the battery charg-

er is designed for indoor use

only. Risk of electric shock.

• To reduce the electric shock haz-

ard, unplug the battery charger

from the mains before cleaning

the charger.

• Do not subject the battery to

strong sunlight over long pe-

riods and do not leave it on a

heater. Heat damages the battery

and there is a risk of explosion.

• Allow a hot battery to cool be-

fore charging.

• Do not open up the battery and

avoid mechanical damage to the

battery. Risk of short circuit and

fumes may be emitted that ir-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273479 PSSA 18 A1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 273479 PSSA 18 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info