Bedienungsanleitung Parkside IAN 273482 PTSS 1200 A1 (Seite 6 von 40) (Deutsch, Englisch, Holländisch)

745532

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

PTSS 1200 A1

Noise emission value:

Noise measurement value determined in accord-

ance with EN 60745. The A-rated noise level of

the power tool is typically as follows:

Sound pressure level: L

= 90.43 dB (A)

Uncertainty: K = 3 dB (A)

Sound power level: L

= 101.43 dB (A)

Uncertainty: K = 3 dB (A)

Wear hearing protection!

Vibration emission value:

Cutting chipboard: a

h,W

= 2.582 m/s

Uncertainty K = 1.5 m/s

NOTE

► The vibration level speciﬁed in these instruc-

tions has been measured in accordance

with a standardised measuring procedure

speciﬁed in EN 60745 and can be used to

make equipment comparisons. The speciﬁed

vibration emission value can also be used to

make an initial exposure estimate.

WARNING!

► The vibration level varies in accordance with

the use of the power tool and may be higher

than the value speciﬁed in these instructions

in some cases. There is a risk of underestima-

tion of the vibration load if the power tool is

used regularly in this manner. Try to keep the

vibration loads as low as possible. Measures

to reduce the vibration load include wearing

gloves and limiting your working time.

All states of operation must be taken into

account (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

General Power Tool

Safety Warnings

WARNING!

► Read all safety warnings and all instructions.

Failure to follow the warnings and instruc-

tions may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive atmo-

spheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools Unmodiﬁed plugs and

matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273482 PTSS 1200 A1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 273482 PTSS 1200 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info