745532
46
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
43
PTSS 1200 A1
GB
WARNING! DANGER DUE TO DUST
EXPOSURE!
When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance.
Wear protective gloves!
Wear a dust mask!
Wear safety goggles!
Wear ear protectors!
Do not allow the teeth of the saw blade to
overheat.
When sawing plastic, avoid melting the plastic.
WARNING! TOXIC FUMES!
Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
Materials containing asbestos may not be pro-
cessed. Asbestos is a known carcinogen.
Original accessories/auxiliary
equipment
Use only the additional equipment and
accessories specified in the operating instruc-
tions. Using attachments or accessory tools
other than those recommended in the operating
instructions can lead to a risk of injury.
Only the original guide rails may be used.
All blades used should conform to EN 847-1.
Operation
Fitting/changing the saw blade
Always remove the plug from the power socket
before working on the appliance.
1. Activate the safety lock-out
and push the
motor unit forwards.
2. Open the clamping lever
. Release the safety
lock-out . The motor unit clicks into place.
3. The clamping screw/washer
14a
is now in posi-
tion
14b
.
4. Press the spindle lock button
and use the
Hex key to open the clamping screw/
washer
14a
.
5. Remove saw blade
.
6. Fitting a saw blade
is carried out in the
reverse order.
WARNING!
The direction of rotation of the saw blade
and the machine must match.
Connecting the sawdust extraction
device
If required, attach the adapter for dust extrac-
tion
to the chip ejector .
Connect an approved dust and chip extraction
device.
Check that the blade guard is
functioning
NOTE
Position the base plate for this operation on
the edge of a stable surface so that the saw
blade
can be lowered.
Lower the circular saw.
Check whether the saw blade
rubs against
the blade guard and whether it moves back to
its starting position automatically.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 273482 PTSS 1200 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside IAN 273482 PTSS 1200 A1

Parkside IAN 273482 PTSS 1200 A1 Bedienungsanleitung - Deutsch, Englisch, Holländisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info