Bedienungsanleitung Parkside IAN 273482 PTSS 1200 A1 (Seite 49 von 52) (Französisch, Italienisch)

745532

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

PTSS 1200 A1

Plunge cutting with guide rail

♦ Place the guide rail with the foam rubber

element on the workpiece.

♦ Place the appliance with the groove

onto the

guide rail .

♦ Adjust the desired cutting depth as described

above.

♦ Place the rear edge (as much as possible)

against a stop.

♦ Switch on the appliance as described in

"Switching on and oﬀ".

♦ Hold the machine with both hands ﬁrmly on the

handles

and and pivot it.

NOTE

► The cut width marking

on the side of the

blade guard shows the front and rear cutting

point of a 165 mm cutting blade at maximum

cutting depth. This applies both for plunge

cuts with guide rail and plunge cuts

without guide rail .

Further applications are not permitted.

Cleaning and maintenance

WARNING! RISK OF INJURY! Switch

the appliance oﬀ and remove the

power plug before starting any

work on the appliance.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ Use a soft, dry cloth to clean the housing.

NOTE

► Replacement parts not listed (such as carbon

brushes, switches) can be ordered via our

service hotline.

Disposal

The packaging is made from environment-

ally friendly material and can be disposed

oﬀ at your local recycling plant.

Do not dispose of power tools in

your normal household waste!

European Directive 2012/19/EU requires that

worn-out power tools be collected separately and

recycled in an environmentally compatible manner.

Warranty

This appliance is provided with a 3-year warranty

valid from the date of purchase. The appliance

has been manufactured with care and inspected

meticulously prior to delivery. Please retain your

receipt as proof of purchase. In the event of a

warranty claim, please contact your Customer

Service unit by telephone. This is the only way to

guarantee free return of your goods.

The warranty only covers claims for material and

manufacturing defects, not for damage sustained

during carriage, components subject to wear and

tear or damage to fragile components such as

switches or batteries. This appliance is intended

solely for private use and not for commercial pur-

poses. The warranty shall be deemed void in cases

of misuse or improper handling, use of force and

modiﬁcations/repairs which have not been carried

out by one of our authorised Service centres. Your

statutory rights are not restricted by this warranty.

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must be

reported immediately after unpacking, but no later

than two days after the date of purchase. Repairs

carried out after expiry of the warranty period shall

be subject to charge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 273482 PTSS 1200 A1 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 273482 PTSS 1200 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info