Bedienungsanleitung Parkside IAN 275325 PSBM 500 C4 (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Französisch)

745534

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

GB IE

before making any adjust-

ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have

the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut

and remove all wires or other foreign

bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Safety information for

drilling machines

• Wear ear protection during im-

pact drilling. The exposure to noise

can cause hearing loss.

• Use the additional handles de-

livered with the device. The loss

of control can result in injuries.

• Hold the device by the insu-

lated gripping surfaces when

performing work in which the

cutting tool may come into con-

tact with hidden wiring or its

own cord. Contact with a live wire

can also cause a charge in metal parts

of the device and result in an electric

shock.

• Use suitable detectors in order

to nd hidden supply lines or

ask the local utility company.

Contact with electrical cables

can lead to electric shock and

re, contact with a gas pipe can

result in an explosion. Damage

to a water pipe can lead to property

damaged and electric shock.

• Keep hands away from rotating

parts. Wait until the power tool

has stopped before placing it

down. Risk of injury!

• Avoid contact with the tool

insert or the component part

immediately after processing.

The parts may be hot and cause burn

injuries.

• Immediately switch off the

power tool if the tool insert is

blocked due to overloading or

tilting of the component part.

The loss of control can result in injuries.

• Secure moving component part

with clamping devices. A hand

held tool can slip and endanger your

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275325 PSBM 500 C4 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info