745470
10
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
6 
GB
IE
NI
PBF 400 A1
Tensioning/replacing the abrasive
belt
WARNING! RISK OF INJURY
Always remove the power plug from the wall
socket before carrying out any work on the
bandfile.
Loosen the clamping device for the abrasive
belt by pushing the clamping lever forwards
(see fig. B). The abrasive belt can now be
removed.
Push the new abrasive belt
through the slot
in the appliance housing. Important: The direc-
tion of the arrows on the inside of the abrasive
belt and on the device housing must match.
Guide the abrasive belt
over the rear and
front rollers .
Press the clamping lever
back into its initial
position.
Manually adjusting the abrasive belt:
If the belt tracking is not centred when you switch
on the appliance, you may need to manually
adjust it.
To do this, turn the adjusting screw
, until the
abrasive belt is running centred. Important:
It is important to ensure that the abrasive belt
is not rubbing against the housing. Check the
belt tracking regularly and adjust it if required
with the adjusting screw (see fig. C).
Dust extraction
WARNING! RISK OF EXPLOSION!
If there is an explosive dust/air mixture, you
must use a specially-designed extraction
device.
RISK OF FIRE DUE TO FLYING SPARKS!
Do not use dust extraction systems (dust bags
or vacuum cleaners) when grinding metals.
WARNING! RISK OF FIRE!
There is a risk of fire when working with elec-
trical appliances that are fitted with a dust
bag or which can be connected to a vacuum
cleaner via a vacuum cleaner adapter. In un-
favourable conditions, e.g. when sparks are
flying while grinding metal or metal residues
in wood, wood dust in the dust bag (or in the
vacuum cleaner dust bag) can spontaneously
ignite. This is a particular risk if the wood
dust is mixed with paint residues or other
chemicals and the workpiece has become hot
after being worked for a long time. Therefore,
do not allow the workpiece or appliance to
overheat, and always empty the dust collec-
tor or the dust bag in the vacuum cleaner
before taking a break from work.
Wear a dust mask!
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 275350 PBF 400 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info