Bedienungsanleitung Parkside IAN 275390 POF 1200 B2 (Seite 10 von 80) (Deutsch, Englisch, Holländisch, Dänisch)

745935

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

GB IE NI

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut

and remove all wires or other foreign

bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Safety notices for milling

cutters

Warning! Milling can result in

the formation of dusts hazardous to

health (e.g. arising from materials

with paints containing lead, materi-

als containing asbestos or some

wood types), which can pose a risk

to the operator or persons nearby.

Make sure that the workplace is

well ventilated. Always wear safety

goggles, safety gloves and respira-

tory protection. Attach a dust ex-

traction system.

• Hold the power tool on the in-

sulated handle surfaces, as the

cutter might hit its own power

cable. Contact with a live wire can

also cause a charge in metal parts of

the appliance and result in an electric

shock.

• Fasten and secure the work-

piece by means of clamps or

with another method on a sta-

ble underground. If you hold the

workpiece only with your hand or

against your own body, it will stay

instable and this can lead to a loss of

control.

• The permissible rotation speed

of the attachment tools must be

at least as high as the highest

rotation speed indicated on the

power tool. Accessories that run

faster than the permissible speed can

be destroyed.

• Cutters and other accessories

must be exactly matching the

tool holder (collet chuck) of your

power tool. Attachment tools that

are not exactly matching the tool hold-

er of the power tool rotate unevenly, vi-

brate very strongly and can ultimately

lead to a loss of control.

• Ensure that the cutter is assem-

bled correctly. A cutter that is not

assembled correctly can break during

the milling or be ejected and present a

risk of injury.

• Move the power tool against

the workpiece only when it is

turned on. Otherwise, there is a risk

of kickback if the attachment tools jam

in the workpiece.

• Do not put your hands in the

cutting area and neither on the

cutter. Hold the additional han-

dle or the motor housing with

your other hand. When holding

the milling cutter with both hands, they

cannot be injured by the cutter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275390 POF 1200 B2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 275390 POF 1200 B2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info