Bedienungsanleitung Parkside IAN 275627 PKGA 14.4 A1 (Seite 9 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745459

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

• Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery

pack, picking up or carrying the

tool. Carrying power tools with your

-

er tools that have the switch on invites

accidents.

• Remove any adjusting key or

wrench before turning the pow-

er tool on. A wrench or a key left

attached to a rotating part of the power

tool may result in personal injury.

• Do not overreach. Keep proper

footing and balance at all times.



tool in unexpected situations.

• Dress properly. Do not wear

loose clothing or jewellery. Keep

your hair, clothing and gloves away

from moving parts. Loose clothes, jew-

ellery or long hair can be caught in

moving parts.

• If devices are provided for the

connection of dust extraction

and collection facilities, ensure

these are connected and prop-

erly used. Use of dust collection can

reduce dust-related hazards.

4) POWER TOOL USE AND CARE

• Do not force the power tool. Use

the correct power tool for your

application. 

will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

• Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust

-ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check

for misalignment or binding of

moving parts, breakage of parts

and any other condition that

may affect the power tool’s op-

eration. If damaged, have the power

tool repaired before use. Many acci-

dents are caused by poorly maintained

power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, tak-

ing into account the working

conditions and the work to be

performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

• Hold the device by the insu-

lated gripping surfaces when

performing work in which the

cutting tool may come into con-

tact with hidden wiring or its

own cord. Contact with a live wire

can also cause a charge in metal parts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275627 PKGA 14.4 A1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info