Bedienungsanleitung Parkside IAN 275627 PKGA 14.4 A1 (Seite 12 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745459

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

GB IE

charge in metal parts of the appliance

and result in an electric shock.

• Use suitable detectors in order



ask the local utility company.

Contact with electrical cables can lead



a gas pipe can result in an explosion.

Damage to a water pipe can lead to

property damaged and electric shock.

• Secure the workpiece. A work-

piece that is retained with clamping

appliances or a vice is held more se-

curely than with your hand.

• Be very careful when handling

tools such as saws, scraper

blades and drills.

and present an injury hazard.

• Wear safety gloves when

changing attachments. -

bles you to avoid injuries if the appli-

ance attachment has heated up after

use.

2) SPECIFIC SAFETY INSTRUCTIONS

WHEN SAWING

• Keep hands away from the

sawing area. Do not reach

underneath the workpiece. Al-

ways stand to the side of the

saw when working. Upon contact

with the blade there is a risk of injury.

• Only when the electric tool is

turned on should the sawing

blade be moved against the

workpiece.-

back if the tool insert jams in the work-

piece.

• Make sure that the footplate

is securely placed against the

workpiece during sawing. 

sawblade can tilt and lead to loss of

control over the power tool.

• 

turn the power tool off and do

not pull the sawblade out of the

cut until it has come to a stand-

still. In this way you will avoid any

kickback and can safely put down the

power tool.

• Use only undamaged saw-

blades in perfect condition. Bent

or blunt blades can break, adversely

affect the cut or cause kickback.

• Do not brake the sawblade af-

ter switching the appliance off

by applying side pressure.

sawblade may be damaged, break or

cause a kickback.

• 

not support the workpiece by

hand or foot. Do not touch any

objects or the ground with the saw run-



• Hold the power tool tightly with

both hands while working and

ensure a secure footing.

power tool is guided more securely

with both hands.

• Wait until the power tool has

stopped before placing it down.



of control over the power tool.

• Switch the appliance off im-

mediately if the sawing blade

jams. Spread the saw cut out and pull



to loss of control over the power tool.

3) SPECIAL SAFETY INFORMATION

DURING SANDING AND SCRAP-

ING

• Only use the power tool for dry

sanding. Do not scrape moist

materials. Penetration of water into

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275627 PKGA 14.4 A1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info