Bedienungsanleitung Parkside IAN 275685 PDMH 4500 A3 (Seite 13 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

745549

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

14 GB/IE

Information about warranty and service processing… / After initial use / Maintenance / Cleaning … / Information about warranty…

Changing chisels

Disconnect the device from the compressed air

source to change the chisel.

Turn the tension spring

oﬀ the chipper cylin-

der, holding it by the rear bracket.

Now replace the chisel.

After initial use

Once the task has been ﬁnished the equipment must

be disconnect from the compressed air supply.

Maintenance

ATTENTION! Disconnect the device from comp

ressed

air before performing maintenance.

Observe the speciﬁed maintenance instructions to

ensure a long life and proper operation of this quality

product.

Check the speed and the oscillation level of the

device after each use. When performing main-

tenance work, please ensure the appropriate

protective clothing and accessories are used

(ear protection, dust mask, safety goggles and

protective gloves).

Your chipper working properly for a long time re-

quires regular lubrication.

Only use speciality oil for compressed air, which

is included. Speciality oil for compressed air is

also available from speciality retailers.

Note: Use environmentally safe oil for com-

pressed air if the device is used outside of

workshops.

You may ensure this in any of the follow-

ing ways:

With an oil-fog lubricator

Install a complete maintenance unit with oil-fog

lubricator between the compressed air source

and the chipper. A maintenance unit is available

from speciality retailers and is not included.

Manually

Add 3–5 drops of speciality oil for compressed

air to the compressed air connection before

every use of the compressed air tool.

If the air tool has not been used for several days

you must add 5–10 drops of oil to the com-

pressed air connection before powering on the

equipment.

Note: Regular lubrication is essen-

tial to ensure the longest possible life

for your compressed air equipment.

The inside of the tool does not have any other tools

which require maintenance.

Only store the product in dry rooms.

Cleaning and Care

ATTENTION! Disconnect the device from com-

pressed air before cleaning or caring for the device.

Do not use cleaners or solvents; these could af-

fect the plastic parts of the device. Ensure that n

water can penetrate the housing.

Clean the tool after ﬁnishing work.

Keep safety devices, venting slots and the motor

housing as dust and dirt free as possible.

Rub the device down with a clean cloth or

blow out with compressed air at a low pressure

setting.

Regularly clean the device with a damp cloth

and a little soft soap.

Occasionally lightly grease the chisel shaft with

regular grease.

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer,

the warranty for this device is 3 years from the date

of purchase. In the event of product defects, you

have legal rights against the retailer of this product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 275685 PDMH 4500 A3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info