745533
13
Zoom out
Zoom in
Vorherige Seite
1/77
Nächste Seite
PBH 1500 C310
GB
IE
Using the chuck:
Insert the chuck key into one of the three
holes above the geared rim. By turning the
chuck key clockwise, you can now close
or tighten the drill holder. Turning the key
counter-clockwise will loosen the clamps.
NOTE
Fixing a drill unevenly or slightly off-center in
the wheel-rim chuck
can cause excessive
vibrations and excessive wear and tear.
To avoid this when fixing the tool, apply
the chuck key to all the 3 positions on the
wheel-rim chuck
one after the other.
WARNING!
Do not use the wheel-rim chuck
for
hammer drilling or chiselling!
Operation
Select operational mode
Hammer switch:
Turn the hammer switch
to the required
symbol:
Hammer drilling = Hammer ON
Drilling = Hammer OFF
Function selector:
Turn and hold the release button for the
function selector switch
and rotate
the function selector switch
so that the
required symbol engages at the arrow
mark.
Hammer drilling
Chiselling
NOTE
The following combinations are available:
Hammer OFF + hammer drilling =
drilling
Hammer ON + hammer drilling =
hammer drilling
Hammer ON + chiselling =
chiselling
Hammer OFF + chiselling = no
function
Preselecting rotational speed
You can use the rotational speed preselector
adjusting wheel
to preselect the rotational
speed.
Work out the right setting with this practical
test:
- low rotation speed (setting 1 or 2) for
tasks requiring careful and precise drilling
- medium rotational speed (setting 3 or 4)
for drilling in steel or wood
- high rotational speed (setting 5 or 6) for
hammer drilling/chiselling in concrete or
stone
Switching on and off
Switching the appliance on:
Press the ON/OFF switch .
Switching the appliance off :
Release the ON/OFF switch .
Working Advice
Before any work on the machine
itself, pull the mains plug.
Vibration Damper
ANTI
VIBRATION
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 277229 PBH 1500 C3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info