745934
10
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
GB
IE
NI
 7
PBS 900 B2
Dismantling/removing the dust collector:
Pull the dust collector
off the appliance.
Dust extraction adapter (with reducer )
(see fig. C):
Push the dust extraction adapter
onto the
extraction nozzle . If necessary, use the re-
ducer by pushing it onto the dust extraction
adapter .
Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the dust extraction adapter
; use the
reducer if necessary.
Removal:
Pull off the dust extraction device hose.
Pull the dust extraction adapter
off (and also
the reducer , if attached).
Operation
Switching on and off
While operating the belt sander, you can choose
between instantaneous and continuous operation.
Switching to instantaneous operation:
Press the ON/OFF switch
.
Switching off instantaneous operation:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
, keep it pressed
in and then press the lock button .
Switching off continuous operation:
Press the ON/OFF switch
and then release
it.
Selecting speed and abrasive belt
You can use the speed preselector wheel to ad-
just the speed, even while the appliance is running
(
= lower speed, + = higher speed). The optimum
belt speed is dependent on the workpiece or ma-
terial being processed. We recommend carrying out
a practice run to determine the correct speed. In
the table below, you will find some recommended
values which will help you determine which belt
and speed to use for which job.
Material/
working area
Softwood
Rough sanding
(grain size)
60
Finishing (grain size) 240
Speed preselection high (5–6)
Material/
working area
Hardwood
Rough sanding
(grain size)
60
Finishing (grain size) 180
Speed preselection high (5–6)
Material/
working area
Chipboard
Rough sanding
(grain size)
60
Finishing (grain size) 150
Speed preselection high (5–6)
Material/
working area
Removing paint/
varnish
Rough sanding
(grain size)
60
Finishing (grain size) ––
Speed preselection high (5–6)
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 279873 PBS 900 B2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside IAN 279873 PBS 900 B2

Parkside IAN 279873 PBS 900 B2 Bedienungsanleitung - Französisch, Italienisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info