Bedienungsanleitung Parkside IAN 280366 PTSG 140 A1 (Seite 20 von 75) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746151

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

■ 16

│

PTSG 140 A1

Replacing or attaching the sanding

paper

CAUTION!

► Ensure that the appliance has been discon-

nected from the power in order to prevent it

from being accidentally switched on during

the replacement process and causing injuries.

♦ Before replacement, dismantle the sanding table

holder

with the sanding table in order to

access the disc more easily.

♦ Select the sanding paper

you require and

remove the backing ﬁlm.

♦ Stick the sanding paper

to the sanding

disc making sure not to trap any air

underneath.

NOTE

► Stick sanding paper

you have already

used to one of the storage covers supplied

so that you can reuse it.

Adjusting the sanding table angle

♦ Undo the rotary knobs ﬁxed to both sides of

the sanding table holder .

♦ Using the angle scale

you can adjust the

sanding table to the required angle.

♦ The angle can be adjusted to anything from

-10 to +50 degrees.

♦ Next, tighten the rotary knobs

so that the

sanding table remains in the required posi-

tion.

Adjusting the angle stop

♦ Undo the angle stop bolt and use the scale

to adjust it to the required angle. The marking

on the scale must match the marking on the

guide rail .

♦ Retighten the stop bolt

to retain the angle.

♦ Push the guide rail

into the table groove

located on the sanding table .

Dust extraction

WARNING! RISK OF FIRE!

■ When working with electrical appliances that

can be connected to a vacuum cleaner via

a vacuum cleaner adapter, there is a risk of

ﬁre! Under certain conditions, wood dust in

the bag of the vacuum cleaner can sponta-

neously ignite. This can occur due to ﬂying

sparks or when sanding over residual metals

in wood. This is particularly likely if the wood

dust is mixed with paint residues or other

chemicals and the workpiece has become hot

after being used for a long time. Therefore,

do not allow the material being sanded and

the appliance to overheat. Always empty the

vacuum cleaner dust bag before taking work

breaks.

Connecting/removing the dust

extraction unit

Connecting:

♦ Insert the adapter

for outside dust extraction

into the extraction nozzle .

When doing so, note the guidance aid on the

appliance and on the adapter .

♦ To lock, turn the adapter

clockwise.

♦ If necessary, use the reducer piece

pushing it onto the adapter .

♦ Push the hose from a suitable dust extraction

appliance (e.g. a workshop vacuum cleaner)

onto the adapter

for external vacuum

extraction or the reducer piece .

Removal:

♦ Pull the vacuum cleaner hose oﬀ the adapter

for external vacuum extraction.

♦ To unlock, turn the adapter

anticlockwise

until the arrow ( ) points to the slot on the

extraction nozzle .

♦ Pull the adapter

for external vacuum ex-

traction including the reducer piece if nec-

essary

oﬀ.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 280366 PTSG 140 A1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info