Bedienungsanleitung Parkside IAN 282491 PSS 250 B2 (Seite 20 von 96) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748066

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

2 0

G B I E

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust

-ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

e) Maintain power tools and insert

tools. Check for misalignment or

binding of moving parts, break-

age of parts and any other con-

dition that may affect the power

tool’s operation. If damaged, have

the power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

h) Keep the handles and grip sur-

face dry, clean and free of oil

and grease. Slippery handles and

gripping surfaces do not allow safe op-

eration and control of the power tool in

unforeseen situations.

5) SERVICE

Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

7) SPECIAL SAFETY DIRECTIONS

FOR BATTERY-OPERATED TOOLS

a) Ensure that the device is

switched off before inserting

the battery. Inserting a battery into

a power tool that is switched on may

result in accidents.

b) Recharge the batteries indoors

only because the battery charger

is designed for indoor use only.

c) To reduce the electric shock haz-

ard, unplug the battery charger

from the mains before cleaning

the charger.

d) Do not subject the battery to

strong sunlight over long pe-

riods and do not leave it on a

heater. Heat damages the battery

and there is a risk of explosion.

e) Allow a hot battery to cool be-

fore charging.

f) Do not open up the battery and

avoid mechanical damage to the

battery. Risk of short circuit and fumes

may be emitted that irritate the respirato-

ry tract. Ensure fresh air and seek medi-

cal assistance in the event of discomfort.

g) Do not use non-rechargeable

batteries!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 282491 PSS 250 B2 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info