746414
26
Zoom out
Zoom in
Vorherige Seite
1/103
Nächste Seite
PSSA 20-Li A1
22 
GB
IE
Adjusting the footplate
RISK OF INJURY!
Always remove the plug from the power
socket before working on the appliance.
Adjust the footplate
according to the cutting
depth.
To do so, undo the locking lever
and move
the footplate to the corresponding position.
Lock this position by closing the locking lever
.
Adjusting the pendulum stroke
You can use the pendulum stroke switch to
adjust the pendular movement of the saw blade
. You can achieve fine, clean-cut edges with-
out pendulum movement (setting "0"). Deacti-
vate pendulum movement when working on thin
workpieces. You can achieve an increasingly
fast work rate if the pendulum stroke is activated
(setting "I").
Use
Switching on and off
Switching on:
First press the safety lock-out
and then the
ON/OFF switch . Afterwards, release the
safety lock-out .
Switching off:
Release the ON/OFF switch
.
Adjusting the rotational speed
Press the ON/OFF switch lightly for a low speed.
Increasing the pressure increases the speed.
NOTE
The integrated motor brake ensures rapid
stoppage.
Guiding the sabre blade safely
To adapt to the workpiece and for safe placement,
the footplate can be swivelled. It must always be
in contact with the workpiece when the appliance
is running.
Practical advice on sawing
Check the material to be worked to make sure
that all foreign objects have been removed,
e.g. nails, screws, etc.
Ensure that the ventilation slits
are not
covered.
Switch the appliance on before moving it
towards the material to be worked.
Switch the appliance off immediately if the saw
blade
jams.
Open up the sawn gap using a suitable tool
and pull out the sabre saw.
Use the appropriate saw blade
and stroke
rate for the material to be worked.
Saw blades optimised for your sabre saw are
available from retail stores in different lengths
for various purposes.
Saw the material at a constant speed.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 282492 PSSA 20 Li A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info