Bedienungsanleitung Parkside IAN 284962 PABH 20 Li B2 (Seite 25 von 101) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746412

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

PABH 20-Li B2

│

21 ■

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack:

♦ Push the rotation direction switch

into the

middle position (lock). Allow the battery pack

to click into the handle.

Removing the battery pack:

♦ Press the release button

and remove the

battery pack .

Operation

NOTE

► Push the rotation direction switch

into

the middle position before carrying out

any work on the power tool (e.g. mainten-

ance, tool-changing, etc.) as well as during

carriage and storage of the power tool.

Unintentional activation of the On/Oﬀ

switch can result in injury.

Selecting a tool

■ For hammer drilling, you will need an SDS-plus

drilling tool.

■ For standard drilling in wood, metal, ceramics

and plastic, you can use an appropriate SDS-

plus drilling tool or a tool with a hexagonal

shank.

■ For screwing, use the screwdriver bits that

you can attach using the SDS bit adapter .

Tool-changing

■ You can use the SDS-plus tool holder to

change tools quickly and easily without the

need for any additional tools.

■ The SDS-plus drilling tool moves freely (depend-

ing on the system). This leads to a radial run-out

deviation while idling. This has no eﬀect on the

accuracy of the drill hole as the drill centres

itself during drilling.

■ The SDS-plus bit adapter

can also hold dif-

ferent types of drills with hexagonal shanks.

■ The dust protection cap

largely prevents the

entry of drilling dust into tool holder during

operation. Ensure that the dust protection cap

does not get damaged when ﬁtting tools.

NOTE

► A damaged dust protection cap

must

be replaced immediately. We recommend

having this done by a customer service

workshop.

Fitting an SDS tool

♦ Insert the tool rotatingly into the tool holder

until it clicks into place.

♦ Check that the tool is properly locked by pulling it.

The system has radial play because of the design.

Removing an SDS tool

♦ Pull the locking sleeve backwards and re-

move the tool.

Fitting a tool with a hexagonal shank

♦ Insert the SDS bit adapter into the tool holder

until it clicks into place.

♦ Check that the SDS bit adapter

is properly

locked by pulling it. The SDS bit adapter has

radial play because of the design.

♦ Pull the locking sleeve

of the SDS bit adapter

backwards and insert the tool with the hex-

agonal shank in the tool holder .

♦ Release the locking sleeve

of the SDS bit

adapter . This locks the holder. Check that

the tool with the hexagonal shank is properly

locked by pulling it. The tool with the hexagonal

shank has radial play because of the design.

Removing a tool with a hexagonal

shank

♦ Pull the locking sleeve backwards and remove

the tool with the hexagonal shank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 284962 PABH 20 Li B2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info