Bedienungsanleitung Parkside IAN 287977 PMFS 200 B2 (Seite 25 von 124) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746518

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

h) Hold the device by the insulated

gripping surfaces when per-

forming work in which the cut-

ting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

5) SERVICE

a) Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Additional safety instructions

Warning! Sanding can result

in the formation of hazar-

dous dusts (e.g. arising from

materials such as paints

containing lead, materials

containing asbestos, metals

or some wood types), which

can present a health hazard

to the operator or persons

in the vicinity if touched or

inhaled. Make sure that the

workplace is well ventilated.

Always wear safety goggles,

safety gloves and respiratory

protection. Attach a dust ex-

traction system.

a) Secure the workpiece. A work-

piece that is retained with clamping

appliances or a vice is held more se-

curely than with your hand.

b) Only use the power tool for dry

sanding. Do not scrape moist

materials. Penetration of water into

the power tool increases the risk of

electric shock.

c) Avoid overheating the sanded

object and the sander itself. Pos-

sible re hazard.

d) The workpiece gets hot dur-

ing grinding. Do not touch the

machined area, allow it to cool

down. There is a risk of burning. Do

not use coolants or the like.

e) Always empty the dust con-

tainer before work breaks.

Sanding dust in the dust sack, micro

lter, paper sack (or in the lter sack or

extraction system lter) can self-ignite

under unfavourable conditions such

as ying sparks caused by grinding

metals. Particular hazards are caused

if the sanding dust is mixed with paint,

polyurethane residues or other chemi-

cal substances, or if the sanded object

is hot after long working periods.

Please check the operating manual of

your vacuum cleaner whether it is suit-

able for the suction of grinding chips.

f) Connect the appliance to a power

socket with a residual current circuit

breaker of rated residual current no

more than 30 mA.

g) If the supply cord of this power

tool is damaged, it must be re-

placed by a specially prepared

cord available through the ser-

vice organization.

Residual risks

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this elec-

tric tool may present the following hazards:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 287977 PMFS 200 B2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info