Bedienungsanleitung Parkside IAN 290720 PSSA 3.6 D4 (Seite 22 von 102) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748024

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

GB IE

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

h) Hold the device by the insulated

gripping surfaces when per-

forming work in which the cut-

ting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

5) CAREFUL HANDLING AND USE

OF BATTERY DEVICES

a) Charge the batteries only in

chargers that are recommended

by the manufacturer. 



of battery is used with other batteries.

b) In the power tools, use only the

batteries designed for the pur-

pose. The use of other batteries may



c) Keep the unused battery away

from paper clips, coins, keys,

nails, screws and other small

metal objects, which could

cause bridging of the contacts.

A short circuit between the battery con-



d) If used incorrectly, liquid may

leak from the battery. Avoid

contact with this. In the event of

accidental contact, rinse off with

water. If the liquid gets into

eyes, seek medical assistance.



irritations or burns.

6) SERVICE

a) Have your power tool serviced

-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

7) SPECIFIC SAFETY INSTRUCTIONS

FOR POWER SCREWDRIVERS:

a) Hold the appliance by the in-

sulated handle grips when

performing work in which the

screw may come into contact

with hidden wiring or its own

power cord. If the screw were to

come into contact with a live electrical

cable, metal parts of the appliance

could also become live and cause an

electric shock.

8) SPECIAL SAFETY DIRECTIONS

FOR BATTERY-OPERATED TOOLS

a) Do not subject the battery to

strong sunlight over long pe-

riods and do not leave it on a

heater. Heat damages the battery

and there is a risk of explosion.

b) Allow a hot battery to cool be-

fore charging.

c) Do not open up the battery and

avoid mechanical damage to

the battery. Risk of short circuit and

fumes may be emitted that irritate the

respiratory tract. Ensure fresh air and

seek medical assistance in the event of

discomfort.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 290720 PSSA 3.6 D4 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info